When accuracy and penetration are non-negotiable, these Nock On Hand-Fletched Axis Match Grade arrows stand alone in precision and build quality.

Each arrow shaft comes from a three-mile continuous run of high modulus carbon with match-grade tolerances — the highest standard Easton produces and is made in the USA.

Built to John Dudley’s exact personal specifications, these arrows are custom cut and hand-fletched with unwavering attention to detail, delivering the tightest groups you’ve ever shot. With brass inserts standard for enhanced FOC and a 4-fletch configuration with 2.5° right helical, these arrows are ready to deliver lethal accuracy whether you’re in the backcountry or on the tournament line with a whisper-quiet flight.

Core Benefits

• Match-Grade Precision: Produced from single-spool, continuous carbon runs, ensuring perfect shaft consistency
• Enhanced Penetration: Standard brass inserts boost FOC and overall weight for superior downrange performance
• Competition-Ready Build: Hand-fletched to John Dudley’s personal arrow specifications using Nock On Certified components
• Field-Proven Quality: Built with 5mm micro-diameter carbon-composite fibers for durability and accuracy

Feature Breakdown

Premium Match-Grade Construction

Each shaft comes from a brand-new carbon spool that produces over three miles of continuous material, cut in sequence to ensure perfect shaft consistency. This proprietary process delivers unmatched accuracy through identical spine and weight characteristics across every arrow in your set.

Professional Hand-Fletching Process

Built using Nock On Certified wraps and Max Stealth Vanes in a 4-fletch configuration with 2.5° right helical. This proven fletching setup provides superior stability and broadhead accuracy.

Each arrow is hand-fletched to match John Dudley’s competition and hunting specifications. This outperforms competitors’ pre-fletch alternatives, which must sacrifice types of vanes, glues, and vane offsets due to what a machine will allow.

Advanced Component Integration

Every arrow includes pre-installed brass HIT inserts with break-off weight adjustment options and pre-installed green 5mm (X) nocks.

NEW MATCH GRADE STEEL HIT COLLARS (Standard with Nock On 5MM Arrows)

Brace for Impact- The NEW Easton Match Grade HIT Collars. Easton’s new Match Grade HIT Collar are designed to increase the impact strength of an arrow using the HIT system. Built out of hardened stainless steel. Come in 6 sizes to accommodate all 5mm Easton Arrows. Included with Easton Match Grade 5mm Arrows. Fits 17/64 & 5/16 Field Points. All Nock On 5MM arrows come standard with the new Match Grade Steel Collars.

Technical Specifications

Arrow Specifications

• Straightness: +/-.001″
• Construction: 5mm micro-diameter carbon-composite fibers
• Fletching: 4-fletch configuration, 2.5° right helical
• Components: Brass 50/75 Grain Break-off HIT 8*32 insert, Stainless Steel Match Collars, green 5mm (X) nocks

Size Chart

Size	Shaft Weight GPI	Collar	O.D.
400	9.0	Match 2	0.264
340	9.5	Match 2.5	0.267
300	10.7	Match 4	0.275
260	11.5	Match 5	0.280

Important Notes

• Up to a 2-business day build time is required
• Contact phone number MUST be provided for order confirmation and specifications
• Hand-fletched arrows are non-returnable once specifications are confirmed
• All sales are final

When accuracy and penetration are non-negotiable, these Nock On Hand-Fletched Axis Match Grade arrows stand alone in precision and build quality.

Each arrow shaft comes from a three-mile continuous run of high modulus carbon with match-grade tolerances — the highest standard Easton produces and is made in the USA.

Built to John Dudley’s exact personal specifications, these arrows are custom cut and hand-fletched with unwavering attention to detail, delivering the tightest groups you’ve ever shot. With brass inserts standard for enhanced FOC and a 4-fletch configuration with 2.5° right helical, these arrows are ready to deliver lethal accuracy whether you’re in the backcountry or on the tournament line with a whisper-quiet flight.

Core Benefits

• Match-Grade Precision: Produced from single-spool, continuous carbon runs, ensuring perfect shaft consistency
• Enhanced Penetration: Standard brass inserts boost FOC and overall weight for superior downrange performance
• Competition-Ready Build: Hand-fletched to John Dudley’s personal arrow specifications using Nock On Certified components
• Field-Proven Quality: Built with 5mm micro-diameter carbon-composite fibers for durability and accuracy

Feature Breakdown

Premium Match-Grade Construction

Each shaft comes from a brand-new carbon spool that produces over three miles of continuous material, cut in sequence to ensure perfect shaft consistency. This proprietary process delivers unmatched accuracy through identical spine and weight characteristics across every arrow in your set.

Professional Hand-Fletching Process

Built using Nock On Certified wraps and Max Stealth Vanes in a 4-fletch configuration with 2.5° right helical. This proven fletching setup provides superior stability and broadhead accuracy.

Each arrow is hand-fletched to match John Dudley’s competition and hunting specifications. This outperforms competitors’ pre-fletch alternatives, which must sacrifice types of vanes, glues, and vane offsets due to what a machine will allow.

Advanced Component Integration

Every arrow includes pre-installed brass HIT inserts with break-off weight adjustment options and pre-installed green 5mm (X) nocks.

NEW MATCH GRADE STEEL HIT COLLARS (Standard with Nock On 5MM Arrows)

Brace for Impact- The NEW Easton Match Grade HIT Collars are designed to increase the impact strength of an arrow using the HIT system. Built out of hardened stainless steel. Come in 6 sizes to accommodate all 5mm Easton Arrows. Included with Easton Match Grade 5mm Arrows. Fits 17/64 & 5/16 Field Points. All Nock On 5MM arrows come standard with the new Match Grade Steel Collars.

Technical Specifications

Arrow Specifications

• Straightness: +/-.001″
• Construction: 5mm micro-diameter carbon-composite fibers
• Fletching: 4-fletch configuration, 2.5° right helical
• Components: Brass 50/75 Grain Break-off HIT 8*32 insert, Stainless Steel Match Collars, green 5mm (X) nocks

Size Chart

Size	Shaft Weight GPI	Collar	O.D.
400	9.0	Match 2	0.264
340	9.5	Match 2.5	0.267
300	10.7	Match 4	0.275
260	11.5	Match 5	0.280

Important Notes

• Up to a 2-business day build time is required
• Contact phone number MUST be provided for order confirmation and specifications
• Hand-fletched arrows are non-returnable once specifications are confirmed
• All sales are final

When accuracy and penetration are non-negotiable, these Nock On Hand-Fletched Axis Match Grade arrows stand alone in precision and build quality.

Each arrow shaft comes from a three-mile continuous run of high modulus carbon with match-grade tolerances — the highest standard Easton produces and is made in the USA.

Built to John Dudley’s exact personal specifications, these arrows are custom cut and hand-fletched with unwavering attention to detail, delivering the tightest groups you’ve ever shot. With brass inserts standard for enhanced FOC and a 4-fletch configuration with 2.5° right helical, these arrows are ready to deliver lethal accuracy whether you’re in the backcountry or on the tournament line with a whisper-quiet flight.

Core Benefits

• Match-Grade Precision: Produced from single-spool, continuous carbon runs, ensuring perfect shaft consistency
• Enhanced Penetration: Standard brass inserts boost FOC and overall weight for superior downrange performance
• Competition-Ready Build: Hand-fletched to John Dudley’s personal arrow specifications using Nock On Certified components
• Field-Proven Quality: Built with 5mm micro-diameter carbon-composite fibers for durability and accuracy

Feature Breakdown

Premium Match-Grade Construction

Each shaft comes from a brand-new carbon spool that produces over three miles of continuous material, cut in sequence to ensure perfect shaft consistency. This proprietary process delivers unmatched accuracy through identical spine and weight characteristics across every arrow in your set.

Professional Hand-Fletching Process

Built using Nock On Certified wraps and Max Stealth Vanes in a 4-fletch configuration with 2.5° right helical. This proven fletching setup provides superior stability and broadhead accuracy.

Each arrow is hand-fletched to match John Dudley’s competition and hunting specifications. This outperforms competitors’ pre-fletch alternatives, which must sacrifice types of vanes, glues, and vane offsets due to what a machine will allow.

Advanced Component Integration

Every arrow includes pre-installed brass HIT inserts with break-off weight adjustment options, New Stainless Steel Match Collars, and pre-installed green 5mm (X) nocks. This complete system ensures maximum accuracy and consistent broadhead alignment and added durability.

Technical Specifications

Arrow Specifications

• Straightness: +/-.001″
• Construction: 5mm micro-diameter carbon-composite fibers
• Fletching: 4-fletch configuration, 2.5° right helical
• Components: Brass 50/75 Grain Break-off HIT 8*32 insert, Stainless Steel Match Collars, green 5mm (X) nocks

Size Chart

Size	Shaft Weight GPI	Collar	O.D.
400	9.0	Match 2	0.264
340	9.5	Match 2.5	0.267
300	10.7	Match 4	0.275
260	11.5	Match 5	0.280

Important Notes

• Up to a 2-business day build time is required
• Contact phone number MUST be provided for order confirmation and specifications
• Hand-fletched arrows are non-returnable once specifications are confirmed
• All sales are final

Expert-Built Arrows That Deliver When It Counts

These hand fletched match grade Full Metal Jacket (FMJ) arrows are the exact arrow setup John Dudley relies on for successful shooting and bowhunting.

Built with meticulous attention to detail, these pro-level arrows are cut to your specified length with inserts installed and ready to shoot right out of the box. Each set delivers match grade straightness (.001+/-) and weight tolerance for unmatched accuracy and penetration performance.

The 5mm FMJ combines a carbon core with an aluminum outer jacket that reduces wind drift and friction for deeper penetration. Each arrow is hand fletched in a 4-fletch configuration with 2.5-degree right helical using Nock On Certified wraps and Max Stealth Vanes, the exact specs from John’s personal setup.

Core Benefits

• Match grade straightness (.001+/-) and tight weight tolerance for field-proven accuracy
• Pre-installed brass HIT inserts boost Front of Center (FOC) for improved long-range ballistics
• Aluminum outer jacket reduces friction for deeper penetration on game
• Hand fletched 4-fletch configuration steers broadheads with precision

The FMJ Advantage

Heavy-Hitting Performance

The FMJ arrow has a heavier overall mass weight compared to standard carbon arrows, giving you increased momentum and penetration power. This extra weight translates to knockdown performance on big game.

With its aluminum sleeve over carbon construction, the FMJ remains John’s go-to choice for elk, moose, and any hunting situation where maximum penetration matters.

“The FMJ is just a demolisher,” John says. “These are heavier overall... and in the field, this thing rams through some serious stuff.”

Friction-Reducing Aluminum Jacket

The aluminum outer jacket on the FMJ reduces friction during penetration compared to standard carbon arrows. This friction reduction, combined with the arrow’s increased mass, creates the perfect combination for punching through game.

The smooth aluminum surface also makes these arrows much easier to pull from targets during practice sessions, particularly from 3D targets in colder temperatures.

4-Fletch Configuration

Each arrow features our precision 4-fletch setup with a 2.5-degree right helical, using Max Stealth Vanes for optimal broadhead steering.

This configuration corrects arrow flight faster than traditional 3-fletch setups and allows you to shoot multiple broadhead types with consistent accuracy.

The 4-fletch pattern compensates for minor tuning variations, giving you more confidence when it matters most.

Brass HIT Insert System

Every FMJ comes standard with pre-installed brass 50/75 grain break-off HIT 8*32 inserts. These custom brass inserts, developed by John himself, boost Front of Center (FOC) weight distribution for improved long-range accuracy.

The inserts are installed using premium hot melt that allows for broadhead indexing if needed. Just warm the insert to adjust broadhead alignment.

Stainless Steel Match Collars

Brace for Impact- The NEW Easton Match Grade HIT Collars. Easton’s new Match Grade HIT Collar are designed to increase the impact strength of an arrow using the HIT system. Built out of hardened stainless steel. Come in 6 sizes to accommodate all 5mm Easton Arrows. Included with Easton Match Grade 5mm Arrows. Fits 17/64 & 5/16 Field Points. All Nock On 5MM arrows come standard with the new Match Grade Steel Collars

 

Match Grade Quality

These aren’t ordinary arrows. They’re match grade with a guaranteed straightness tolerance of +/-.001″.

Each batch of FMJs comes from a continuous 3-mile spool of carbon, cut in sequence to ensure spine and weight consistency. This manufacturing process creates arrows that are “perfect clones” of each other, eliminating variables and maximizing accuracy.

Technical Specifications

• Arrow Diameter: 5mm (0.197″)
• Spine Options: 400, 340, 300, 250
• Straightness: +/- .001″ (match grade)
• Pre-installed Components: Brass 50/75 Grain Break-off HIT 8*32 inserts, green 5mm (X) nocks, Stainless Steel Collars
• Fletching: 4-fletch configuration with 2.5-degree right helical
• Vanes: Max Stealth
• Quantity: 12 count

Size Chart

Size	Shaft Weight GPI	Collar	O.D.
400	10.2	Match 2	0.263
340	11.3	Match 3	0.269
300	12.0	Match 4	0.273
250	11.5	Match 3	0.273

Spine Selection Guide

The FMJ 300 spine at 29.5″ with 75 grains of brass and a 100-grain point weighs approximately 570 grains. With 50 grains of brass instead of 75, the same arrow weighs about 545 grains.

These weights don’t include lighted nocks, which add approximately 12 grains if installed.

Professional Performance

John doesn’t just sell these arrows. He relies on them personally.

“I’m not building my own arrows anymore,” he explains. “I walk in the shop, I get these exact arrows, and I take them and shoot them.”

The hand fletched FMJ arrows require no additional tuning or knock indexing. They’re ready to deliver tight groups straight from the package.

Note: Custom-built arrows are non-returnable once specifications are confirmed.

Hand Fletched FMJ Match Grade Arrows: Frequently Asked Questions

Are these arrows worth the higher price compared to standard carbon arrows?

YES, No Doubt! These aren’t the cheapest arrows on the shelf, but they are hand built as identical clones that perform so consistently that John Dudley himself trusts them completely. They’ve put meat in his freezer for years.

When you factor in the match grade straightness, the hand fletching, and the fact that these arrows are ready to shoot right out of the box, you’re getting an incredible value.

Would you rather spend a little more on arrows that perform when it counts, or would you rather save money and lose the shot of a lifetime?

How much heavier are these compared to my current carbon arrows? Will that affect my shooting?

The FMJ 300 spine, at 29.5″ with 75 grains of brass and a 100-grain point weighs approximately 570 grains, is heavier than most carbon setups.

You’ll need to adjust your sight pins, and you’ll have more arc at longer distances. But you gain devastating penetration and momentum that demolishes whatever it hits.

The FMJ is a heavy hitter by design. If you’re hunting big game or want maximum penetration, that extra weight is your friend. Lighter arrows give you a flatter trajectory, but heavier arrows give you more knockdown power.

Can I shoot these arrows in cold weather without issues?

Absolutely. Compared to standard carbon arrows, these arrows are easier to pull from targets in cold weather.

The aluminum outer jacket reduces friction, which means less wrestling with stuck arrows during winter practice sessions. The aluminum jacket also helps with durability in extreme temperatures.

John has shot these in everything from Texas heat to Canadian cold, and they perform consistently.

Do I need to re-tune my bow when switching to these arrows?

You’ll likely need some tuning adjustments because of the weight difference, but the 4-fletch configuration is forgiving. The 4-fletch setup corrects arrow flight faster than traditional 3-fletch and compensates for minor tuning variations. Most archers can get these flying well with minimal adjustments.

The match grade straightness and weight consistency means they stay consistent once you get them tuned. Just make sure you select the right spine for your setup.

Are these overkill for whitetail deer?

There’s no such thing as “too much penetration” when it comes to ethical hunting. Yes, these arrows will demolish a whitetail, but that’s what you want. Complete pass-throughs mean better blood trails and quicker recoveries.

John has used these arrows on every animal from whitetails to elk. The confidence you get knowing your arrow will punch through whatever it hits is unmatched. The quiet flight characteristics also help. Deer don’t pick up the sound like they do with lighter arrows.

How long will these arrows last with regular practice?

These arrows are built tough. The aluminum outer jacket protects the carbon core and makes them more durable than standard carbon arrows. They’re easier to pull from targets, which reduces stress on the arrow during practice.

If you practice a lot in field conditions, you might break a few here and there, but that’s true of any arrow. The durability you get with the FMJ construction is definitely above average.

Expert-Built Arrows That Deliver When It Counts

These hand fletched match grade Full Metal Jacket (FMJ) arrows are the exact arrow setup John Dudley relies on for successful shooting and bowhunting.

Built with meticulous attention to detail, these pro-level arrows are cut to your specified length with inserts installed and ready to shoot right out of the box. Each set delivers match grade straightness (.001+/-) and weight tolerance for unmatched accuracy and penetration performance.

The 5mm FMJ combines a carbon core with an aluminum outer jacket that reduces wind drift and friction for deeper penetration. Each arrow is hand fletched in a 4-fletch configuration with 2.5-degree right helical using Nock On Certified wraps and Max Stealth Vanes, the exact specs from John’s personal setup.

Core Benefits

• Match grade straightness (.001+/-) and tight weight tolerance for field-proven accuracy
• Pre-installed brass HIT inserts boost Front of Center (FOC) for improved long-range ballistics
• Aluminum outer jacket reduces friction for deeper penetration on game
• Hand fletched 4-fletch configuration steers broadheads with precision

The FMJ Advantage

Heavy-Hitting Performance

The FMJ arrow has a heavier overall mass weight compared to standard carbon arrows, giving you increased momentum and penetration power. This extra weight translates to knockdown performance on big game.

With its aluminum sleeve over carbon construction, the FMJ remains John’s go-to choice for elk, moose, and any hunting situation where maximum penetration matters.

“The FMJ is just a demolisher,” John says. “These are heavier overall... and in the field, this thing rams through some serious stuff.”

Friction-Reducing Aluminum Jacket

The aluminum outer jacket on the FMJ reduces friction during penetration compared to standard carbon arrows. This friction reduction, combined with the arrow’s increased mass, creates the perfect combination for punching through game.

The smooth aluminum surface also makes these arrows much easier to pull from targets during practice sessions, particularly from 3D targets in colder temperatures.

4-Fletch Configuration

Each arrow features our precision 4-fletch setup with a 2.5-degree right helical, using Max Stealth Vanes for optimal broadhead steering.

This configuration corrects arrow flight faster than traditional 3-fletch setups and allows you to shoot multiple broadhead types with consistent accuracy.

The 4-fletch pattern compensates for minor tuning variations, giving you more confidence when it matters most.

Brass HIT Insert System

Every FMJ comes standard with pre-installed brass 50/75 grain break-off HIT 8*32 inserts. These custom brass inserts, developed by John himself, boost Front of Center (FOC) weight distribution for improved long-range accuracy.

The inserts are installed using premium hot melt that allows for broadhead indexing if needed. Just warm the insert to adjust broadhead alignment.

Stainless Steel Match Collars

Brace for Impact- The NEW Easton Match Grade HIT Collars. Easton’s new Match Grade HIT Collar are designed to increase the impact strength of an arrow using the HIT system. Built out of hardened stainless steel. Come in 6 sizes to accommodate all 5mm Easton Arrows. Included with Easton Match Grade 5mm Arrows. Fits 17/64 & 5/16 Field Points. All Nock On 5MM arrows come standard with the new Match Grade Steel Collars.

Match Grade Quality

These aren’t ordinary arrows. They’re match grade with a guaranteed straightness tolerance of +/-.001″.

Each batch of FMJs comes from a continuous 3-mile spool of carbon, cut in sequence to ensure spine and weight consistency. This manufacturing process creates arrows that are “perfect clones” of each other, eliminating variables and maximizing accuracy.

Technical Specifications

• Arrow Diameter: 5mm (0.197″)
• Spine Options: 400, 340, 300, 250
• Straightness: +/- .001″ (match grade)
• Pre-installed Components: Brass 50/75 Grain Break-off HIT 8*32 inserts, green 5mm (X) nocks, Stainless Steel Collars
• Fletching: 4-fletch configuration with 2.5-degree right helical
• Vanes: Max Stealth
• Quantity: 12 count

Size Chart

Size	Shaft Weight GPI	Collar	O.D.
400	10.2	Match 2	0.263
340	11.3	Match 3	0.269
300	12.0	Match 4	0.273
250	11.5	Match 3	0.273

Spine Selection Guide

The FMJ 300 spine at 29.5″ with 75 grains of brass and a 100-grain point weighs approximately 570 grains. With 50 grains of brass instead of 75, the same arrow weighs about 545 grains.

These weights don’t include lighted nocks, which add approximately 12 grains if installed.

Professional Performance

John doesn’t just sell these arrows. He relies on them personally.

“I’m not building my own arrows anymore,” he explains. “I walk in the shop, I get these exact arrows, and I take them and shoot them.”

The hand fletched FMJ arrows require no additional tuning or knock indexing. They’re ready to deliver tight groups straight from the package.

Note: Custom-built arrows are non-returnable once specifications are confirmed.

Hand Fletched FMJ Match Grade Arrows: Frequently Asked Questions

Are these arrows worth the higher price compared to standard carbon arrows?

YES, No Doubt! These aren’t the cheapest arrows on the shelf, but they are hand built as identical clones that perform so consistently that John Dudley himself trusts them completely. They’ve put meat in his freezer for years.

When you factor in the match grade straightness, the hand fletching, and the fact that these arrows are ready to shoot right out of the box, you’re getting an incredible value.

Would you rather spend a little more on arrows that perform when it counts, or would you rather save money and lose the shot of a lifetime?

How much heavier are these compared to my current carbon arrows? Will that affect my shooting?

The FMJ 300 spine, at 29.5″ with 75 grains of brass and a 100-grain point weighs approximately 570 grains, is heavier than most carbon setups.

You’ll need to adjust your sight pins, and you’ll have more arc at longer distances. But you gain devastating penetration and momentum that demolishes whatever it hits.

The FMJ is a heavy hitter by design. If you’re hunting big game or want maximum penetration, that extra weight is your friend. Lighter arrows give you a flatter trajectory, but heavier arrows give you more knockdown power.

Can I shoot these arrows in cold weather without issues?

Absolutely. Compared to standard carbon arrows, these arrows are easier to pull from targets in cold weather.

The aluminum outer jacket reduces friction, which means less wrestling with stuck arrows during winter practice sessions. The aluminum jacket also helps with durability in extreme temperatures.

John has shot these in everything from Texas heat to Canadian cold, and they perform consistently.

Do I need to re-tune my bow when switching to these arrows?

You’ll likely need some tuning adjustments because of the weight difference, but the 4-fletch configuration is forgiving. The 4-fletch setup corrects arrow flight faster than traditional 3-fletch and compensates for minor tuning variations. Most archers can get these flying well with minimal adjustments.

The match grade straightness and weight consistency means they stay consistent once you get them tuned. Just make sure you select the right spine for your setup.

Are these overkill for whitetail deer?

There’s no such thing as “too much penetration” when it comes to ethical hunting. Yes, these arrows will demolish a whitetail, but that’s what you want. Complete pass-throughs mean better blood trails and quicker recoveries.

John has used these arrows on every animal from whitetails to elk. The confidence you get knowing your arrow will punch through whatever it hits is unmatched. The quiet flight characteristics also help. Deer don’t pick up the sound like they do with lighter arrows.

How long will these arrows last with regular practice?

These arrows are built tough. The aluminum outer jacket protects the carbon core and makes them more durable than standard carbon arrows. They’re easier to pull from targets, which reduces stress on the arrow during practice.

If you practice a lot in field conditions, you might break a few here and there, but that’s true of any arrow. The durability you get with the FMJ construction is definitely above average.

Sonic KE — Fully Loaded — Ready-to-Group Arrows (12ct)

Field-Tested Performance, Factory-Ready Precision

The Nock On Sonic KE arrows deliver exactly what serious bowhunters need — rock-solid consistency, enhanced downrange performance, and hard-hitting impact that gets the job done when it counts.

John Dudley designed these 6mm super straight arrows to be deadly accurate right out of the box, with pre-fletched 3″ Nock On Hybrid vanes that guarantee tight groups in the triple digits. Built in the USA using Easton’s seamless ACU-Carbon process, these shafts give you 100% weight and spine consistency from shaft to shaft and dozen to dozen, so you can trust every arrow in your quiver.

Save Big, Lose Nothing

The Sonic KE gives you all the accuracy at the best price. These arrows are priced right, with you getting big benefits without losing on straightness or weight tolerances.

Sonic KE Arrows Core Benefits

• Enhanced Kinetic Energy: Standard 75/50-grain brass inserts boost FOC up to 25% for superior downrange ballistics and momentum through your target.
• Premium-Grade Construction: SELECT GRADE shafts (+-.0015) presorted from the factory for exceptional straightness and weight consistency.
• Versatile Performance: Perfect balance of speed and impact for everything from Total Archery Challenges to taking down large game animals.
• Ready to Hunt: Factory pre-fletched with AAE 2.7″ Stealth Hybrid 3-degree right helical in a 3-fletch configuration.

Maximum Front-End Weight Options

The Sonic KE comes standard with custom 75/50 break-off inserts, giving you control over your setup based on your shooting needs. These inserts allow you to boost your FOC dramatically while maintaining optimal overall arrow weight. The shaft’s lighter mass weight compared to Axis or FMJ arrows means you can run the full 75 grains up front and still maintain the total arrow weight you’re used to.

When you choose the full 75 grains of brass, you’ll get 25% more FOC compared to standard arrows with 50 grains of brass. This means better wind-cutting ability and increased momentum that carries through your target — exactly what you need when it matters most.

Spine Selection Tip: For maximum performance with the 75-grain inserts, select one spine size stiffer than your normal arrows with aluminum inserts.

High-Performance American-Made Shafts

The Sonic KE arrows are built using Easton’s proven AccuCarbon process right here in the USA. This means guaranteed straightness and weight tolerances from shaft to shaft and dozen to dozen. These 6mm shafts provide the perfect balance — stiff enough for consistent accuracy but light enough to maintain speed with the heavier front end.

Each arrow is a SELECT GRADE shaft (+-.0015) that’s presorted at the factory, giving you only the highest quality shafts for straightness and weight consistency. This tight tolerance control eliminates variables from your shooting equation, allowing you to focus on your shot execution rather than worrying about arrow inconsistency.

Versatile Applications

Whether you’re heading to a Total Archery Challenge, shooting 3D, or hunting big game, these arrows deliver the performance you need.

The lighter shaft weight combined with the heavy front end gives you options that weren’t possible before, maintaining speed for longer distances while still getting the penetration and durability benefits of higher FOC.

For hunting setups, the increased FOC dramatically improves flight stability and penetration on game animals. For competition, you’ll get the accuracy benefits of premium-grade arrows at a price point that won’t break the bank.

Factory Pre-Fletched for Immediate Results

Every Sonic KE arrow comes pre-fletched with AAE 2.7″ Stealth Hybrid vanes in a 3-fletch configuration with a perfect 3-degree right helical. This setup delivers proven accuracy at an accessible price point.

The fletch profile provides excellent stability without sacrificing speed, giving you the best of both worlds.

Technical Specifications

• Construction: 6mm diameter carbon shaft with ACU-Carbon process
• Insert System: 75/50 grain break-off brass insert (75 grain standard)
• Fletching: AAE 2.7″ Stealth Hybrid, 3-fletch, 3° right helical
• Straightness: SELECT GRADE (+-.0015)
• Spine Options: Available in 400, 340, 300, and 250 spines (select one spine stiffer than usual when using 75-grain inserts)
• Weight: Lighter overall mass weight than comparable Axis or FMJ arrows
• Quantity: 12 arrows per pack

Size Chart

Size	Shaft Weight GPI	O.D.
400	7.2	0.275
340	7.8	0.279
300	8.8	0.286
250	9.5	0.291

Performance Summary

The Sonic KE gives you options other arrows can’t match. Go with 75 grains up front for maximum FOC and penetration, or break off to 50 grains when you need more speed.

This arrow is designed based on what actually works in the field — no marketing hype required; just field-tested performance that delivers when it counts.

These arrows represent the perfect balance of performance and value — premium-grade shafts with the features serious bowhunters need at a price point that makes sense. Whether you’re chasing bulls in the mountains or competing at the highest level, the Sonic KE has the consistency and performance to get it done.

Nock On Sonic KE Arrows: Frequently Asked Questions

What spine size should I choose for the Sonic KE arrows?

When using the full 75-grain brass inserts, we recommend selecting one spine size stiffer than you would normally shoot. This compensates for the additional front weight that weakens the arrow’s effective spine.

For example, if you typically shoot a 300 spine with 50 grains of brass up front, consider going to a 250 spine when using the whole 75 grains of brass with the Sonic KE.

How do Sonic KE arrows compare weight-wise to Axis or FMJ arrows?

The Sonic KE has a lighter overall mass weight than comparable Axis or FMJ arrows. For example, a 250-spine Sonic KE weighs approximately 9.5 grains per inch compared to 11.7 grains per inch for a 5mm Axis.

This lighter shaft weight allows you to add more weight up front (75 grains vs. 50 grains) while maintaining a similar total arrow weight to what you’re used to with heavier shafts.

Can I modify the fletching on the pre-fletched Sonic KE arrows?

Yes. While the arrows come pre-fletched with a 3-fletch AAE 2.7″ Stealth Hybrid vane in a 3-degree right helical, you can certainly strip these fletches and modify them to your preferences. John Dudley does this for some of his applications, such as switching to a 4-fletch configuration or using different vanes for specific shooting scenarios.

What makes the FOC (forward of center) advantage important?

The Sonic KE arrows with the full 75-grain brass insert can achieve up to 25% more FOC compared to standard arrows with 50 grains up front. This increased FOC provides several performance advantages:

• Better stability and accuracy in windy conditions
• Improved penetration and momentum transfer for hunting applications
• More consistent arrow flight, especially at longer distances
• Maintained downrange energy for taking down large game animals

How versatile are the Sonic KE arrows for different applications?

The Sonic KE arrows are designed to excel in multiple archery disciplines. The arrow’s base construction provides the consistency needed for both hunting and precision target shooting.

For hunting, the higher FOC option with 75 grains up front provides the penetration and momentum needed for large game animals. For target competitions like the Total Archery Challenge, you can opt for the 50-grain configuration to gain more speed while maintaining excellent accuracy.

What are the break-off inserts? How do they work?

The Sonic KE arrows come standard with 75/50 grain break-off brass inserts. These inserts allow you to customize the weight at the front of your arrow based on your needs:

• Use the full 75 grains for maximum FOC and penetration when hunting.
• Break off 25 grains to reduce to 50 grains of brass when you need more speed for longer distance target shooting. This versatility allows one arrow system to serve multiple purposes and adapt to different shooting scenarios.

Are these arrows ready to shoot right out of the box?

Yes. The Sonic KE arrows come fully assembled and pre-fletched with AAE 2.7″ Stealth Hybrid vanes in a 3-fletch configuration with a 3-degree right helical. They’re built to John Dudley’s exact specifications and are ready to group as soon as you open the package, though you will need to cut them to your preferred length and install your choice of field points or broadheads.

Sonic KE — Fully Loaded — Ready-to-Group Arrows (6ct)

Field-Tested Performance, Factory-Ready Precision

The Nock On Sonic KE arrows deliver exactly what serious bowhunters need — rock-solid consistency, enhanced downrange performance, and hard-hitting impact that gets the job done when it counts.

John Dudley designed these 6mm super straight arrows to be deadly accurate right out of the box, with pre-fletched 3″ Nock On Hybrid vanes that guarantee tight groups in the triple digits. Built in the USA using Easton’s seamless ACU-Carbon process, these shafts give you 100% weight and spine consistency from shaft to shaft and dozen to dozen, so you can trust every arrow in your quiver.

Save Big, Lose Nothing

The Sonic KE gives you all the accuracy at the best price. These arrows are priced right, with you getting big benefits without losing on straightness or weight tolerances.

Sonic KE Arrows Core Benefits

• Enhanced Kinetic Energy: Standard 75/50-grain brass inserts boost FOC up to 25% for superior downrange ballistics and momentum through your target.
• Premium-Grade Construction: SELECT GRADE shafts (+-.0015) presorted from the factory for exceptional straightness and weight consistency.
• Versatile Performance: Perfect balance of speed and impact for everything from Total Archery Challenges to taking down large game animals.
• Ready to Hunt: Factory pre-fletched with AAE 2.7″ Stealth Hybrid 3-degree right helical in a 3-fletch configuration.

Maximum Front-End Weight Options

The Sonic KE comes standard with custom 75/50 break-off inserts, giving you control over your setup based on your shooting needs. These inserts allow you to boost your FOC dramatically while maintaining optimal overall arrow weight. The shaft’s lighter mass weight compared to Axis or FMJ arrows means you can run the full 75 grains up front and still maintain the total arrow weight you’re used to.

When you choose the full 75 grains of brass, you’ll get 25% more FOC compared to standard arrows with 50 grains of brass. This means better wind-cutting ability and increased momentum that carries through your target — exactly what you need when it matters most.

Spine Selection Tip: For maximum performance with the 75-grain inserts, select one spine size stiffer than your normal arrows with aluminum inserts.

High-Performance American-Made Shafts

The Sonic KE arrows are built using Easton’s proven AccuCarbon process right here in the USA. This means guaranteed straightness and weight tolerances from shaft to shaft and dozen to dozen. These 6mm shafts provide the perfect balance — stiff enough for consistent accuracy but light enough to maintain speed with the heavier front end.

Each arrow is a SELECT GRADE shaft (+-.0015) that’s presorted at the factory, giving you only the highest quality shafts for straightness and weight consistency. This tight tolerance control eliminates variables from your shooting equation, allowing you to focus on your shot execution rather than worrying about arrow inconsistency.

Versatile Applications

Whether you’re heading to a Total Archery Challenge, shooting 3D, or hunting big game, these arrows deliver the performance you need.

The lighter shaft weight combined with the heavy front end gives you options that weren’t possible before, maintaining speed for longer distances while still getting the penetration and durability benefits of higher FOC.

For hunting setups, the increased FOC dramatically improves flight stability and penetration on game animals. For competition, you’ll get the accuracy benefits of premium-grade arrows at a price point that won’t break the bank.

Factory Pre-Fletched for Immediate Results

Every Sonic KE arrow comes pre-fletched with AAE 2.7″ Stealth Hybrid vanes in a 3-fletch configuration with a perfect 3-degree right helical. This setup delivers proven accuracy at an accessible price point.

The fletch profile provides excellent stability without sacrificing speed, giving you the best of both worlds.

Technical Specifications

• Construction: 6mm diameter carbon shaft with ACU-Carbon process
• Insert System: 75/50 grain break-off brass insert (75 grain standard)
• Fletching: AAE 2.7″ Stealth Hybrid, 3-fletch, 3° right helical
• Straightness: SELECT GRADE (+-.0015)
• Spine Options: Available in 400, 340, 300, and 250 spines (select one spine stiffer than usual when using 75-grain inserts)
• Weight: Lighter overall mass weight than comparable Axis or FMJ arrows
• Quantity: 6 arrows per pack

Size Chart

Size	Shaft Weight GPI	O.D.
400	7.2	0.275
340	7.8	0.279
300	8.8	0.286
250	9.5	0.291

Performance Summary

The Sonic KE gives you options other arrows can’t match. Go with 75 grains up front for maximum FOC and penetration, or break off to 50 grains when you need more speed.

This arrow is designed based on what actually works in the field — no marketing hype required; just field-tested performance that delivers when it counts.

These arrows represent the perfect balance of performance and value — premium-grade shafts with the features serious bowhunters need at a price point that makes sense. Whether you’re chasing bulls in the mountains or competing at the highest level, the Sonic KE has the consistency and performance to get it done.

Nock On Sonic KE Arrows: Frequently Asked Questions

What spine size should I choose for the Sonic KE arrows?

When using the full 75-grain brass inserts, we recommend selecting one spine size stiffer than you would normally shoot. This compensates for the additional front weight that weakens the arrow’s effective spine.

For example, if you typically shoot a 300 spine with 50 grains of brass up front, consider going to a 250 spine when using the whole 75 grains of brass with the Sonic KE.

How do Sonic KE arrows compare weight-wise to Axis or FMJ arrows?

The Sonic KE has a lighter overall mass weight than comparable Axis or FMJ arrows. For example, a 250-spine Sonic KE weighs approximately 9.5 grains per inch compared to 11.7 grains per inch for a 5mm Axis.

This lighter shaft weight allows you to add more weight up front (75 grains vs. 50 grains) while maintaining a similar total arrow weight to what you’re used to with heavier shafts.

Can I modify the fletching on the pre-fletched Sonic KE arrows?

Yes. While the arrows come pre-fletched with a 3-fletch AAE 2.7″ Stealth Hybrid vane in a 3-degree right helical, you can certainly strip these fletches and modify them to your preferences. John Dudley does this for some of his applications, such as switching to a 4-fletch configuration or using different vanes for specific shooting scenarios.

What makes the FOC (forward of center) advantage important?

The Sonic KE arrows with the full 75-grain brass insert can achieve up to 25% more FOC compared to standard arrows with 50 grains up front. This increased FOC provides several performance advantages:

• Better stability and accuracy in windy conditions
• Improved penetration and momentum transfer for hunting applications
• More consistent arrow flight, especially at longer distances
• Maintained downrange energy for taking down large game animals

How versatile are the Sonic KE arrows for different applications?

The Sonic KE arrows are designed to excel in multiple archery disciplines. The arrow’s base construction provides the consistency needed for both hunting and precision target shooting.

For hunting, the higher FOC option with 75 grains up front provides the penetration and momentum needed for large game animals. For target competitions like the Total Archery Challenge, you can opt for the 50-grain configuration to gain more speed while maintaining excellent accuracy.

What are the break-off inserts? How do they work?

The Sonic KE arrows come standard with 75/50 grain break-off brass inserts. These inserts allow you to customize the weight at the front of your arrow based on your needs:

• Use the full 75 grains for maximum FOC and penetration when hunting.
• Break off 25 grains to reduce to 50 grains of brass when you need more speed for longer distance target shooting. This versatility allows one arrow system to serve multiple purposes and adapt to different shooting scenarios.

Are these arrows ready to shoot right out of the box?

Yes. The Sonic KE arrows come fully assembled and pre-fletched with AAE 2.7″ Stealth Hybrid vanes in a 3-fletch configuration with a 3-degree right helical. They’re built to John Dudley’s exact specifications and are ready to group as soon as you open the package, though you will need to cut them to your preferred length and install your choice of field points or broadheads.

Here's your chance to build your on own Sonic KE to SLICE THE WIND & HIT HARD for an awesome price! The Nock On Sonic KE is a 6mm super straight, extremely consistent high-performance arrow that comes standard with 75/50 grain break off brass inserts for the front. The Sonic KE is a custom engineered arrow that’s perfect for both Hunting and Target archery speeds while boosting FOC up to 25% when using the provided custom brass inserts. The Sonic KE is built in the USA using Easton’s seamless ACU-Carbon process for 100% weight and spine consistency from shaft to shaft and from dozen to dozen. Lighter overall mass weight provides for a wider-range of arrow build options using the provided 75/50 break off inserts. This shaft is perfect for anything ranging from the Total Archery Challenges to Bowhunting large game animals. 

The Nock On Sonic KE is a SELECT GRADE shaft (+-.0015) that is pre-sorted from the factory giving you the highest quality shafts for straightness and weight.

Save Big, Lose Nothing

The Sonic KE gives you all the accuracy at the best price. These arrows are priced right, with you getting big benefits without losing on straightness or weight tolerances.

Sonic KE Arrows Core Benefits

• Enhanced Kinetic Energy: Standard 75/50-grain brass inserts boost FOC up to 25% for superior downrange ballistics and momentum through your target.
• Premium-Grade Construction: SELECT GRADE shafts (+-.0015) presorted from the factory for exceptional straightness and weight consistency.
• Versatile Performance: Perfect balance of speed and impact for everything from Total Archery Challenges to taking down large game animals.

Maximum Front-End Weight Options

The Sonic KE comes standard with custom 75/50 break-off inserts, giving you control over your setup based on your shooting needs. These inserts allow you to boost your FOC dramatically while maintaining optimal overall arrow weight. The shaft’s lighter mass weight compared to Axis or FMJ arrows means you can run the full 75 grains up front and still maintain the total arrow weight you’re used to.

When you choose the full 75 grains of brass, you’ll get 25% more FOC compared to standard arrows with 50 grains of brass. This means better wind-cutting ability and increased momentum that carries through your target — exactly what you need when it matters most.

Spine Selection Tip: For maximum performance with the 75-grain inserts, select one spine size stiffer than your normal arrows with aluminum inserts.

High-Performance American-Made Shafts

The Sonic KE arrows are built using Easton’s proven AccuCarbon process right here in the USA. This means guaranteed straightness and weight tolerances from shaft to shaft and dozen to dozen. These 6mm shafts provide the perfect balance — stiff enough for consistent accuracy but light enough to maintain speed with the heavier front end.

Each arrow is a SELECT GRADE shaft (+-.0015) that’s presorted at the factory, giving you only the highest quality shafts for straightness and weight consistency. This tight tolerance control eliminates variables from your shooting equation, allowing you to focus on your shot execution rather than worrying about arrow inconsistency.

Versatile Applications

Whether you’re heading to a Total Archery Challenge, shooting 3D, or hunting big game, these arrows deliver the performance you need.

The lighter shaft weight combined with the heavy front end gives you options that weren’t possible before, maintaining speed for longer distances while still getting the penetration and durability benefits of higher FOC.

For hunting setups, the increased FOC dramatically improves flight stability and penetration on game animals. For competition, you’ll get the accuracy benefits of premium-grade arrows at a price point that won’t break the bank.

Technical Specifications

• Construction: 6mm diameter carbon shaft with ACU-Carbon process
• Insert System: 75/50 grain break-off brass insert (75 grain standard)
• Fletching: AAE 2.7″ Stealth Hybrid, 3-fletch, 3° right helical
• Straightness: SELECT GRADE (+-.0015)
• Spine Options: Available in 400, 340, 300, and 250 spines (select one spine stiffer than usual when using 75-grain inserts)
• Weight: Lighter overall mass weight than comparable Axis or FMJ arrows
• Quantity: 6 arrows per pack

• Please note that we would recommend getting one spine size stiffer than normal and use the full 75 grains for maximum affect!

Size Chart

Size	Shaft Weight GPI	O.D.
400	7.2	0.275
340	7.8	0.279
300	8.8	0.286
250	9.5	0.291

 

Here's your chance to build your on own Sonic KE to SLICE THE WIND & HIT HARD for an awesome price! The Nock On Sonic KE is a 6mm super straight, extremely consistent high-performance arrow that comes standard with 75/50 grain break off brass inserts for the front. The Sonic KE is a custom engineered arrow that’s perfect for both Hunting and Target archery speeds while boosting FOC up to 25% when using the provided custom brass inserts. The Sonic KE is built in the USA using Easton’s seamless ACU-Carbon process for 100% weight and spine consistency from shaft to shaft and from dozen to dozen. Lighter overall mass weight provides for a wider-range of arrow build options using the provided 75/50 break off inserts. This shaft is perfect for anything ranging from the Total Archery Challenges to Bowhunting large game animals. 

The Nock On Sonic KE is a SELECT GRADE shaft (+-.0015) that is pre-sorted from the factory giving you the highest quality shafts for straightness and weight.

Save Big, Lose Nothing

The Sonic KE gives you all the accuracy at the best price. These arrows are priced right, with you getting big benefits without losing on straightness or weight tolerances.

Sonic KE Arrows Core Benefits

• Enhanced Kinetic Energy: Standard 75/50-grain brass inserts boost FOC up to 25% for superior downrange ballistics and momentum through your target.
• Premium-Grade Construction: SELECT GRADE shafts (+-.0015) presorted from the factory for exceptional straightness and weight consistency.
• Versatile Performance: Perfect balance of speed and impact for everything from Total Archery Challenges to taking down large game animals.

Maximum Front-End Weight Options

The Sonic KE comes standard with custom 75/50 break-off inserts, giving you control over your setup based on your shooting needs. These inserts allow you to boost your FOC dramatically while maintaining optimal overall arrow weight. The shaft’s lighter mass weight compared to Axis or FMJ arrows means you can run the full 75 grains up front and still maintain the total arrow weight you’re used to.

When you choose the full 75 grains of brass, you’ll get 25% more FOC compared to standard arrows with 50 grains of brass. This means better wind-cutting ability and increased momentum that carries through your target — exactly what you need when it matters most.

Spine Selection Tip: For maximum performance with the 75-grain inserts, select one spine size stiffer than your normal arrows with aluminum inserts.

High-Performance American-Made Shafts

The Sonic KE arrows are built using Easton’s proven AccuCarbon process right here in the USA. This means guaranteed straightness and weight tolerances from shaft to shaft and dozen to dozen. These 6mm shafts provide the perfect balance — stiff enough for consistent accuracy but light enough to maintain speed with the heavier front end.

Each arrow is a SELECT GRADE shaft (+-.0015) that’s presorted at the factory, giving you only the highest quality shafts for straightness and weight consistency. This tight tolerance control eliminates variables from your shooting equation, allowing you to focus on your shot execution rather than worrying about arrow inconsistency.

Versatile Applications

Whether you’re heading to a Total Archery Challenge, shooting 3D, or hunting big game, these arrows deliver the performance you need.

The lighter shaft weight combined with the heavy front end gives you options that weren’t possible before, maintaining speed for longer distances while still getting the penetration and durability benefits of higher FOC.

For hunting setups, the increased FOC dramatically improves flight stability and penetration on game animals. For competition, you’ll get the accuracy benefits of premium-grade arrows at a price point that won’t break the bank.

• Please note that we would recommend getting one spine size stiffer than normal and use the full 75 grains for maximum affect! 

Size Chart

Size	Shaft Weight GPI	O.D.
400	7.2	0.275
340	7.8	0.279
300	8.8	0.286
250	9.5	0.291

The Ultimate Match-Grade Arrows From John Dudley

I’ve spent decades perfecting my arrow setup, and these Nock On Axis Pro Series shafts are the culmination of that journey. These are the arrows I grab when heading into the backcountry or stepping up to the competition line.

These 5mm arrows deliver boosted FOC match-grade straightness (+/-.001″), and heart-stopping penetration. Each 12-pack comes with pre-installed brass HIT inserts (50/75 grain break-off option), green 5mm X nocks, and the NEW match grade stainless steel HIT Collars. These carbon-composite micro-diameter shafts are built to the exact specifications I demand for both competition and hunting.

Available in spine sizes 400, 340, 300, 260, with options that’ll perfectly match your bow setup, draw length, and hunting style.

Core Benefits

• Match-Grade Straightness (+/-.001″): Provides exceptional accuracy and consistency shot after shot
• Micro-Diameter 5mm Design: Delivers superior penetration and reduced wind drift
• Brass HIT Inserts (50/75 Grain): Allows customizable FOC for perfect balance
• Match Grade Stainless Steel Collars: Boost Durability & Creates perfect alignment for broadheads

The Axis Advantage

Timeless Performance

The Axis has been my go-to arrow throughout my entire career.

These particular Axis shafts are special because they’re match grade, meaning the straightness and spine consistency throughout the shaft are guaranteed. These aren’t random production arrows; they’re literally “twins” from the same continuous carbon fiber production run, hand-selected for perfect consistency.

I’ve taken these arrows on every backwoods pursuit you can think of, from whitetail to dangerous game. The 5mm micro-diameter shaft punches through game with minimal resistance while providing the durability needed for hard-hitting shots. The smaller diameter also means less wind drift at longer ranges, which translates to tighter groups when conditions get tough.

Custom Brass Insert System

Each Axis Pro shaft comes standard with our custom brass HIT inserts, the same inserts I personally designed and have used for over 18 years. These eight to 32 threaded inserts offer a unique 50/75 grain break-off design, allowing you to customize your front-of-center (FOC) balance.

Want more penetration and stability? Keep the full 75 grains. Looking for a bit more speed? Break off to 50 grains. Either way, you’re getting the benefits of brass weight up front where it matters most. This insert system provides the perfect balance between speed and downrange energy.

NEW MATCH GRADE STEEL HIT COLLARS (Standard with Nock On 5MM Arrows)

Brace for Impact- The NEW Easton Match Grade HIT Collars. Easton’s new Match Grade HIT Collar are designed to increase the impact strength of an arrow using the HIT system. Built out of hardened stainless steel. Come in 6 sizes to accommodate all 5mm Easton Arrows. Included with Easton Match Grade 5mm Arrows. Fits 17/64 & 5/16 Field Points. All Nock On 5MM arrows come standard with the new Match Grade Steel Collars.

Technical Specifications

• Construction: 5mm micro-diameter carbon-composite
• Match Grade Straightness: +/-.001″
• Available Spine Sizes: 400, 340, 300, 260
• Insert System: 50/75 Grain Break-off Brass HIT (eight to 32 thread)
• Nocks: Pre-installed green 5mm X nocks
• Fletching Options: Pre-fletched 4-vane configuration or raw shafts
• Weight (300 spine, 29.5″ arrow, 100-grain point):
• With 50-grain insert: 514 grains
• With 75-grain insert: 539 grains

Size Chart

Size	Shaft Weight GPI	Collar	O.D.
400	9.0	Match 2	0.264
340	9.5	Match 2.5	0.267
300	10.7	Match 4	0.275
260	11.5	Match 5	0.280

Field-Proven Performance

These arrows bridge the gap between target precision and hunting toughness. At my draw length and throughout my career, I’ve found these arrows hit that sweet spot of weight, speed, and penetration, delivering results on everything from 3D courses to the most challenging hunting scenarios.

What sets these arrows apart from standard production shafts is the quality control process we demand from Easton. These arrows don’t require the hours of prep work lesser arrows do — no floating, spine indexing, or knock turning. The homework has been done for you. Order these arrows, add your broadheads, and hit the field with confidence.

Whether you’re competing at Total Archery Challenge or pursuing trophy game, these arrows deliver the accuracy and penetration you demand. I trust this arrow when everything is on the line.

The Ultimate Match-Grade Arrows From John Dudley

I’ve spent decades perfecting my arrow setup, and these Nock On Axis Pro Series shafts are the culmination of that journey. These are the arrows I grab when heading into the backcountry or stepping up to the competition line.

These 5mm arrows deliver boosted FOC match-grade straightness (+/-.001″), and heart-stopping penetration. Each 12-pack comes with pre-installed brass HIT inserts (50/75 grain break-off option), green 5mm X nocks, and the NEW match grade stainless steel HIT Collars. These carbon-composite micro-diameter shafts are built to the exact specifications I demand for both competition and hunting.

Available in spine sizes 400, 340, 300, 260, with options that’ll perfectly match your bow setup, draw length, and hunting style.

Core Benefits

• Match-Grade Straightness (+/-.001″): Provides exceptional accuracy and consistency shot after shot
• Micro-Diameter 5mm Design: Delivers superior penetration and reduced wind drift
• Brass HIT Inserts (50/75 Grain): Allows customizable FOC for perfect balance
• Match Grade Stainless Steel Collars: Boost Durability & Creates perfect alignment for broadheads

The Axis Advantage

Timeless Performance

The Axis has been my go-to arrow throughout my entire career.

These particular Axis shafts are special because they’re match grade, meaning the straightness and spine consistency throughout the shaft are guaranteed. These aren’t random production arrows; they’re literally “twins” from the same continuous carbon fiber production run, hand-selected for perfect consistency.

I’ve taken these arrows on every backwoods pursuit you can think of, from whitetail to dangerous game. The 5mm micro-diameter shaft punches through game with minimal resistance while providing the durability needed for hard-hitting shots. The smaller diameter also means less wind drift at longer ranges, which translates to tighter groups when conditions get tough.

Custom Brass Insert System

Each Axis Pro shaft comes standard with our custom brass HIT inserts, the same inserts I personally designed and have used for over 18 years. These eight to 32 threaded inserts offer a unique 50/75 grain break-off design, allowing you to customize your front-of-center (FOC) balance.

Want more penetration and stability? Keep the full 75 grains. Looking for a bit more speed? Break off to 50 grains. Either way, you’re getting the benefits of brass weight up front where it matters most. This insert system provides the perfect balance between speed and downrange energy.

NEW MATCH GRADE STEEL HIT COLLARS (Standard with Nock On 5MM Arrows)

Brace for Impact- The NEW Easton Match Grade HIT Collars. Easton’s new Match Grade HIT Collar are designed to increase the impact strength of an arrow using the HIT system. Built out of hardened stainless steel. Come in 6 sizes to accommodate all 5mm Easton Arrows. Included with Easton Match Grade 5mm Arrows. Fits 17/64 & 5/16 Field Points. All Nock On 5MM arrows come standard with the new Match Grade Steel Collars.

Technical Specifications

• Construction: 5mm micro-diameter carbon-composite
• Match Grade Straightness: +/-.001″
• Available Spine Sizes: 400, 340, 300, 260
• Insert System: 50/75 Grain Break-off Brass HIT (eight to 32 thread)
• Nocks: Pre-installed green 5mm X nocks
• Fletching Options: Pre-fletched 4-vane configuration or raw shafts
• Weight (300 spine, 29.5″ arrow, 100-grain point):
• With 50-grain insert: 514 grains
• With 75-grain insert: 539 grains

Size Chart

Size	Shaft Weight GPI	Collar	O.D.
400	9.0	Match 2	0.264
340	9.5	Match 2.5	0.267
300	10.7	Match 4	0.275
260	11.5	Match 5	0.280

Field-Proven Performance

These arrows bridge the gap between target precision and hunting toughness. At my draw length and throughout my career, I’ve found these arrows hit that sweet spot of weight, speed, and penetration, delivering results on everything from 3D courses to the most challenging hunting scenarios.

What sets these arrows apart from standard production shafts is the quality control process we demand from Easton. These arrows don’t require the hours of prep work lesser arrows do — no floating, spine indexing, or knock turning. The homework has been done for you. Order these arrows, add your broadheads, and hit the field with confidence.

Whether you’re competing at Total Archery Challenge or pursuing trophy game, these arrows deliver the accuracy and penetration you demand. I trust this arrow when everything is on the line.

The Nock On Full Metal Jacket Pro Series delivers heavy-hitting performance with match-grade precision. These 5mm Easton arrows feature a carbon core wrapped in an aluminum outer jacket, engineered for maximum penetration and less wind drift.

I’ve used FMJs for over a decade during countless hunts and target competitions because they deliver when it matters most. Each arrow has +/-.001 straightness tolerance with weight and spine consistency that eliminates the tedious process of arrow sorting. The pre-installed brass 50/75 grain break-off HIT inserts and New Match Grade Stainless Steel Collars create a deadly accurate system right out of the box.

Available in 250, 300, 340, and 400 spine sizes, these arrows are built for hunters who demand field-proven reliability.

Core Benefits

• Superior Durability: Carbon core with aluminum jacket creates a robust shaft that withstands impact
• Match-Grade Precision: Guaranteed +/-.001 straightness with spine and weight consistency
• Deep Penetration: Heavier overall weight combined with brass inserts that deliver knockout power
• Wind-Defying Performance: Aluminum jacket minimizes crosswind drift for better long-range accuracy

Premium Construction and Performance

Carbon Core With Aluminum Jacket

The Full Metal Jacket Pro Series combines a carbon inner core with a precision aluminum outer jacket. This hybrid construction delivers the best of both worlds: carbon’s lightweight strength and aluminum’s consistency and durability.

The aluminum exterior provides unmatched straightness while minimizing wind drift during flight. When passing through targets or game, the smooth aluminum exterior reduces friction for superior penetration.

Match-Grade Selection Process

Every arrow in your dozen is guaranteed to be within +/-.001 straightness tolerance.

These match-grade arrows eliminate the frustrating process of sorting through shafts to find the most consistent performers. Each dozen is weight-matched and spine-consistent, giving you ballistic precision that produces tighter groups downrange.

These are literally twins cut from the same three-mile continuous arrow manufacturing process, ensuring identical performance from arrow to arrow.

Brass HIT Inserts

Standard with every FMJ Pro Series is a break-off brass insert system.

Each arrow comes with a 75-grain brass insert that can be easily broken down to 50 grains, giving you the flexibility to customize your front-of-center (FOC) weight distribution. This higher front weight percentage maintains momentum and minimizes wind drift to boost long-range accuracy and penetration.

New Stainless Steel Match Grade Collars- standard on Nock On Match Grade Shafts

Brace for Impact- The NEW Easton Match Grade HIT Collars. Easton’s new Match Grade HIT Collar are designed to increase the impact strength of an arrow using the HIT system. Built out of hardened stainless steel. Come in 6 sizes to accommodate all 5mm Easton Arrows. Included with Easton Match Grade 5mm Arrows. Fits 17/64 & 5/16 Field Points. All Nock On 5MM arrows come standard with the new Match Grade Steel Collars.

Pre-Installed Green 5mm Nocks

Each FMJ Pro Series arrow comes with pre-installed green 5mm X nocks.

These tried-and-true nocks provide consistent string release and are compatible with most lighted nocks on the market. The 5mm diameter creates the perfect balance between durability and weight while maintaining excellent component compatibility.

Field Performance

The Full Metal Jacket Pro Series excels in hunting scenarios where penetration and durability are critical. At 570 grains (300 spine with 75-grain insert at 29.5″ length), these arrows provide knockout power for elk, moose, and other large game. The heavier overall weight quiets your bow and delivers more momentum downrange for pass-through shots on big game.

For whitetail hunters and mid-range shots, the FMJ provides match-grade accuracy with devastating terminal performance. The aluminum exterior makes these arrows easier to pull from targets than all-carbon shafts, perfect for winter practice sessions and 3D competitions when temperatures stiffen target foam.

Technical Specifications

• Construction: 5mm carbon core with aluminum outer jacket
• Straightness: Match grade (+/-.001)
• Spine Options: 250, 300, 340, 400
• Components Included:
• Pre-installed green 5mm X nocks
• Brass 50/75 grain break-off HIT inserts
• Stainless Steel Collars
• Weight (300 spine, 29.5″ arrow):
• With 75-grain brass insert: 570 grains
• With 50-grain brass insert: 545 grains

Size Chart

Size	Shaft Weight GPI	Collar	O.D.
400	10.2	Match 2	0.263
340	11.3	Match 3	0.269
300	12.0	Match 4	0.273
250	11.5	Match 3	0.273

The Right Arrow for the Hunt

The FMJ Pro Series is ideal for hunters seeking maximum penetration and durability. The heavier overall weight makes these perfect for elk, moose, and other large game hunts where knockdown power matters most. They’re also excellent for whitetail hunters who want quieter bow performance and easier arrow removal from targets during practice.

For those who want all the benefits of the FMJ system with maximum consistency, the Match-Grade Pro Series delivers premium performance that eliminates guesswork. Stop wasting time tuning and sorting arrows. Grab a dozen FMJs and experience the confidence that comes from shooting what I use in the field and on the podium.

The Nock On Full Metal Jacket Pro Series delivers heavy-hitting performance with match-grade precision. These 5mm Easton arrows feature a carbon core wrapped in an aluminum outer jacket, engineered for maximum penetration and less wind drift.

I’ve used FMJs for over a decade during countless hunts and target competitions because they deliver when it matters most. Each arrow has +/-.001 straightness tolerance with weight and spine consistency that eliminates the tedious process of arrow sorting. The pre-installed brass 50/75 grain break-off HIT inserts and New Match Grade Stainless Steel Collars create a deadly accurate system right out of the box.

Available in 250, 300, 340, and 400 spine sizes, these arrows are built for hunters who demand field-proven reliability.

Core Benefits

• Superior Durability: Carbon core with aluminum jacket creates a robust shaft that withstands impact
• Match-Grade Precision: Guaranteed +/-.001 straightness with spine and weight consistency
• Deep Penetration: Heavier overall weight combined with brass inserts that deliver knockout power
• Wind-Defying Performance: Aluminum jacket minimizes crosswind drift for better long-range accuracy

Premium Construction and Performance

Carbon Core With Aluminum Jacket

The Full Metal Jacket Pro Series combines a carbon inner core with a precision aluminum outer jacket. This hybrid construction delivers the best of both worlds: carbon’s lightweight strength and aluminum’s consistency and durability.

The aluminum exterior provides unmatched straightness while minimizing wind drift during flight. When passing through targets or game, the smooth aluminum exterior reduces friction for superior penetration.

Match-Grade Selection Process

Every arrow in your dozen is guaranteed to be within +/-.001 straightness tolerance.

These match-grade arrows eliminate the frustrating process of sorting through shafts to find the most consistent performers. Each dozen is weight-matched and spine-consistent, giving you ballistic precision that produces tighter groups downrange.

These are literally twins cut from the same three-mile continuous arrow manufacturing process, ensuring identical performance from arrow to arrow.

Brass HIT Inserts

Standard with every FMJ Pro Series is a break-off brass insert system.

Each arrow comes with a 75-grain brass insert that can be easily broken down to 50 grains, giving you the flexibility to customize your front-of-center (FOC) weight distribution. This higher front weight percentage maintains momentum and minimizes wind drift to boost long-range accuracy and penetration.

New Stainless Steel Match Grade Collars- standard on Nock On Match Grade Shafts

Brace for Impact- The NEW Easton Match Grade HIT Collars. Easton’s new Match Grade HIT Collar are designed to increase the impact strength of an arrow using the HIT system. Built out of hardened stainless steel. Come in 6 sizes to accommodate all 5mm Easton Arrows. Included with Easton Match Grade 5mm Arrows. Fits 17/64 & 5/16 Field Points. All Nock On 5MM arrows come standard with the new Match Grade Steel Collars.

Pre-Installed Green 5mm Nocks

Each FMJ Pro Series arrow comes with pre-installed green 5mm X nocks.

These tried-and-true nocks provide consistent string release and are compatible with most lighted nocks on the market. The 5mm diameter creates the perfect balance between durability and weight while maintaining excellent component compatibility.

Field Performance

The Full Metal Jacket Pro Series excels in hunting scenarios where penetration and durability are critical. At 570 grains (300 spine with 75-grain insert at 29.5″ length), these arrows provide knockout power for elk, moose, and other large game. The heavier overall weight quiets your bow and delivers more momentum downrange for pass-through shots on big game.

For whitetail hunters and mid-range shots, the FMJ provides match-grade accuracy with devastating terminal performance. The aluminum exterior makes these arrows easier to pull from targets than all-carbon shafts, perfect for winter practice sessions and 3D competitions when temperatures stiffen target foam.

Technical Specifications

• Construction: 5mm carbon core with aluminum outer jacket
• Straightness: Match grade (+/-.001)
• Spine Options: 250, 300, 340, 400
• Components Included:
• Pre-installed green 5mm X nocks
• Brass 50/75 grain break-off HIT inserts
• Stainless Steel Collars
• Weight (300 spine, 29.5″ arrow):
• With 75-grain brass insert: 570 grains
• With 50-grain brass insert: 545 grains

Size Chart

Size	Shaft Weight GPI	Collar	O.D.
400	10.2	Match 2	0.263
340	11.3	Match 3	0.269
300	12.0	Match 4	0.273
250	11.5	Match 3	0.273

The Right Arrow for the Hunt

The FMJ Pro Series is ideal for hunters seeking maximum penetration and durability. The heavier overall weight makes these perfect for elk, moose, and other large game hunts where knockdown power matters most. They’re also excellent for whitetail hunters who want quieter bow performance and easier arrow removal from targets during practice.

For those who want all the benefits of the FMJ system with maximum consistency, the Match-Grade Pro Series delivers premium performance that eliminates guesswork. Stop wasting time tuning and sorting arrows. Grab a dozen FMJs and experience the confidence that comes from shooting what I use in the field and on the podium.

 

The New Easton 5.0 Match is the all-new lightweight, small diameter arrow, designed to be a versatile shaft that offers multiple setup options due to the new High Modulus Accu-carbon. The lighter overall mass weight of the Easton 5.0 allows for a versatile range of arrow setup options that give you the ability to boost higher-FOC configurations without boosting overall weight. The Nock On Easton 5.0 comes standard with BRASS 50/75 gr HIT insert & New Match Grade Stainless Steel collars giving you more durability and F.O.C options than standard 5.0 that are available. Built on a micro-diameter 5mmAcu-Carbon platform, the Easton 5.0 reduces friction for enhanced penetration and decreases wind resistance for greater accuracy and higher velocity downrange. Crafted in the USA using Easton’s seamless Acu-Carbon processand high-modulus carbon fiber, the 5.0 ensures consistent weight and spine in every shaft and across every dozen.  The 5.0 features Easton’s new 5MM Microlite™ Nock System, which is a more compact nock body and a redesigned throat for a perfect string fit. 

Available in spine sizes (250, 300, 340, 400) the Easton 5.0 accommodates virtually all bowhunting setups.

Why the New 5.0 VS Axis? - the Short answer is Speed & More component Options! The benefits to the new 5.0 Carbon is that this new higher modulus carbon is lighter weight and allows an archer to add in extra front insert, point weight or lighted nocks to the arrow while keeping the overall weight of the arrow similar to the original axis that wouldn’t have those. I have personally loved the Original AXIS match grade shafts using the brass inserts for 20 years now. They are dependable and deadly accurate. For the archer who is lower in pulling weight or shorter in draw length and is looking to save any weight possible to boost speed then this NEW 5.0 is a great arrow for that. The 5.0 is about 2 grains lighter per inch of arrow and saving that weight lets you choose whether to get the speed or add weight to the right places to boost your FOC numbers. These options and higher modulus carbon do come at a cost though with the price tag being higher for the 5.0 than with an Axis. If you are not chasing speed numbers or on a limited budget the Standard Match Grade Axis are still and always will be an awesome choice. I have used both the Axis & 5.0 throughout the season and will continue to depending on the application. - Dudley 

Size Chart

Size	Shaft Weight GPI	Collar	O.D.
400	6.5	Match 0.5	0.253
340	7.5	Match 1	0.258
300	8.4	Match 2	0.264
250	9.5	Match 3	0.270

The New Easton 5.0 Match is the all-new lightweight, small diameter arrow, designed to be a versatile shaft that offers multiple setup options due to the new High Modulus Accu-carbon. The lighter overall mass weight of the Easton 5.0 allows for a versatile range of arrow setup options that give you the ability to boost higher-FOC configurations without boosting overall weight. The Nock On Easton 5.0 comes standard with BRASS 50/75 gr HIT insert & New Match Grade Stainless Steel collars giving you more durability and F.O.C options than standard 5.0 that are available. Built on a micro-diameter 5mmAcu-Carbon platform, the Easton 5.0 reduces friction for enhanced penetration and decreases wind resistance for greater accuracy and higher velocity downrange. Crafted in the USA using Easton’s seamless Acu-Carbon processand high-modulus carbon fiber, the 5.0 ensures consistent weight and spine in every shaft and across every dozen.  The 5.0 features Easton’s new 5MM Microlite™ Nock System, which is a more compact nock body and a redesigned throat for a perfect string fit. 

Available in spine sizes (250, 300, 340, 400) the Easton 5.0 accommodates virtually all bowhunting setups.

Why the New 5.0 VS Axis? - the Short answer is Speed & More component Options! The benefits to the new 5.0 Carbon is that this new higher modulus carbon is lighter weight and allows an archer to add in extra front insert, point weight or lighted nocks to the arrow while keeping the overall weight of the arrow similar to the original axis that wouldn’t have those. I have personally loved the Original AXIS match grade shafts using the brass inserts for 20 years now. They are dependable and deadly accurate. For the archer who is lower in pulling weight or shorter in draw length and is looking to save any weight possible to boost speed then this NEW 5.0 is a great arrow for that. The 5.0 is about 2 grains lighter per inch of arrow and saving that weight lets you choose whether to get the speed or add weight to the right places to boost your FOC numbers. These options and higher modulus carbon do come at a cost though with the price tag being higher for the 5.0 than with an Axis. If you are not chasing speed numbers or on a limited budget the Standard Match Grade Axis are still and always will be an awesome choice. I have used both the Axis & 5.0 throughout the season and will continue to depending on the application. - Dudley 

Size Chart

Size	Shaft Weight GPI	Collar	O.D.
400	6.5	Match 0.5	0.253
340	7.5	Match 1	0.258
300	8.4	Match 2	0.264
250	9.5	Match 3	0.270

 Blade thickness- 0.35"

When every second of shooting light counts, Nockturnal Lighted Nocks deliver unmatched reliability and brightness you can count on in the field.

These super-bright green LED nocks feature our foolproof linear switch activation system that performs when it matters most. Whether you’re tracking your arrow’s flight path or following up after the shot, these nocks provide the visibility and dependability serious bowhunters demand.

Core Benefits

• Field-Proven Reliability: Rock-solid activation system that works flawlessly in any hunting condition.
• Universal Compatibility: Perfect fit for Nock On Series 5mm Arrows plus universal sizing for S, H, and GT arrows.
• Extended Performance: 20+ hours of ultra-bright illumination from long-life lithium batteries.
• Instant Operation: Bowstring-activated linear switch ensures immediate illumination on release.

Feature Breakdown

Advanced Linear Switch Technology

The heart of our Nockturnal system is the innovative linear switch mechanism. This plunger-style activation system engages instantly when your bowstring makes contact, guaranteeing illumination from release to impact.

No more fumbling with complicated switches or unreliable activation systems — when you need visibility, Nockturnals deliver.

Versatile Fit System

Each 3-pack includes our precision-engineered nock collar adapter sleeves, ensuring perfect compatibility across multiple arrow sizes.

The base nock fits X-diameter arrows, while included adapters accommodate GT, S, and H arrows. This universal fitting system maintains an ideal nock fit on your string, delivering consistent arrow flight comparable to standard X nocks.

Bulletproof Construction

Built with ultra-strong, clear polycarbonate construction, these nocks are engineered to withstand heavy impact while protecting the internal LED and battery system. The weather-sealed design ensures reliable performance in any hunting condition, from rainy morning sits to late-season snow.

Smart Power Management

The streamlined 15-grain design houses our advanced lithium battery system, providing over 20 hours of bright, consistent illumination. Each nock features an easy access port for quick deactivation using the Nockturnal Nock Tool, a small screwdriver, or most broadhead tips.

Technical Specifications

• Weight: 15 grains
• Battery Life: 20+ hours
• Construction: Impact-resistant clear polycarbonate
• Activation: Bowstring-activated linear switch
• Compatibility: X, H, S, and GT arrows with included adapters
• Quantity: 3-pack
• Color: Green LED
• Weatherproofing: Full water and weather resistance

Performance Features

• Immediate activation on release
• Visible in both daylight and darkness
• Tool-free installation
• Consistent arrow flight characteristics
• Easy deactivation system
• Reliable in all weather conditions

The Nockturnal difference is clear from the moment you nock your first arrow. These aren’t just lighted nocks — they’re a field-proven solution that gives you the confidence to take on any hunting situation, from dark ground blinds to last-light shot opportunities.

When reliability and performance matter, there’s no better choice than Nockturnal.

The Nockturnal lighted UNISIZE STROBING Nocks are sized perfectly to fit directly into the Nock On Series 5mm Arrows. They also have universal bushing to fit S, H and GT size arrows. These nocks are an ideal match for nock fit on the string. These GREEN/BLUE STROBE 400 times per minute for an extreme visual with a super long battery life.

Nockturnal Lighted FIT Nock

Features:

• Super Strong Clear Polycarbonate Construction
• Available in Strobing or Non-Strobing Versions
• Fits X, H, S, and GT Arrows
• 20+ Hour Battery Life
• 3-Pack

Improved LED's in your Green Strobing nocks

Non-Strobing FIT Nock: Designed to fit nearly every hunting arrow on the market the Nockturnal Fit non-strobing base nock will fit X-diameter arrows, and each three-pack of Fit nocks includes three sets of Nock Collar adapter sleeves to fit GT, S and H arrows. Each Fit nock features ultra-strong, impact-resistant, clear polycarbonate nock construction encapsulating the super-bright single LED that’s activated by a patented string-activated, piston-driven linear contact switch. Like all Nockturnal nocks, the Fit is guaranteed to reliably activate immediately when the string is released, and it can be switched off quickly and easily with the newly designed Nockturnal Nock Tool, a small screwdriver or most broadhead tips via an opening in the side of the nock. With well in excess of 20 hours of lithium battery life, each Nockturnal Fit weights approximately 25 grains and will remain brightly lit for arrow retrieval and can be easily spotted in daylight or darkness.

The strobing version alternates 400 times a minute between the Green/Blue.

These 100 grain combo field points are the perfect size for the Nock On Match Grade 5mm arrows and also works with the Sonic KE. They fit perfectly flush allowing for easy removal from the target and reduce point loss in target from improper fit. Size 17/64 - 12 count

Bitzenburger Custom Set Fletching Jig

Field-Tested and Nock On Approved

The Nock On Custom Bitzenburger Fletching Jig delivers professional-grade arrow-building precision that lasts a lifetime.

Each jig is removed from the box and then custom preset to John Dudley’s exact specifications, allowing you to start fletching immediately with confidence. These zinc die-cast alloy jigs are rock-solid, stable, and built for decades of flawless performance.

If you’re serious about arrow building, this is the jig that flat-out performs.

Fletching Jig Core Benefits

• Preconfigured to John Dudley’s exact specs: Start fletching perfect arrows right out of the box with the same 4-fletch 2.5-degree helical setup Dudley uses for both hunting and target archery.
• Precision-machined all-metal construction: Built from durable zinc die-cast alloy that’ll last decades.
• Fully inspected and field-tested: Every jig undergoes complete quality control inspection before shipping.
• Self-centering shaft receiver: Accepts and perfectly centers any arrow shaft on the market today.

Professional-Grade Construction

All-Metal Durability

Unlike plastic jigs that flex and wear out, the solid metal Bitzenburger construction ensures precise, consistent fletching placement every time. The all-metal design also makes cleaning adhesive residue easy and prevents the warping issues common in plastic alternatives.

I’ve owned my jig for 30 years and have seen archers use these jigs for their lifetime — this is truly the last fletching jig you’ll need to buy.

Precision Adjustment System

The Bitzenburger features large, easy-to-use dials at the top and bottom of the magnet holder, making angle adjustments quick and straightforward. This allows for perfect fine-tuning of your fletching offset or helical angle to match your shooting style and arrow build requirements. The jig holds the clamp at a 45-degree angle for clear visibility throughout the fletching process.

Powerful Magnetic Clamp

The permanent horseshoe magnet ensures precise, uniform placement of all feathers and vanes. The metal clamp design allows for easy cleaning of adhesive buildup, maintaining consistent vane placement arrow after arrow.

Each jig comes with either a premium Right or Left helical clamp that delivers perfect helical fletching patterns.

Customizable Fletching Patterns

Preset for Immediate Use

Each Nock On Bitzenburger comes configured to John Dudley’s specifications right out of the box.

You’ll start fletching the exact 4-fletch setup with 2.5-degree helical Dudley uses for both hunting and competition without making a single adjustment.

Adjustable Fletching Spacing

The jig features a precision nock receiver with three spacing configurations to match your preferred fletching pattern:

• 3-fletch 120-degree spacing (traditional triangular pattern)
• 4-fletch 90-degree spacing (John Dudley’s preferred setup)
• 4-fletch 75x105-degree spacing (advanced crosswind stability pattern)

Switching between patterns requires simple adjustments to the set screws, with audible click confirmations that ensure perfect spacing every time.

Technical Specifications

• Construction: Zinc die-cast alloy
• Clamp Type: Right or Left helical (John prefers Right helical)
• Weight: 1.9 lbs.
• Preset Configuration: 4-fletch, 90-degree spacing, 2.5-degree helical
• Shaft Compatibility: Universal — fits all arrow shaft diameters
• Includes: Jig body, helical clamp, adjustment tools, and instructions

Performance Summary

John Dudley designed this jig setup based on what actually works in the field. The Nock On Bitzenburger is the perfect combination of professional-grade construction, precision engineering, and field-tested performance.

When you’re building arrows your success depends on, this jig delivers consistent, professional results every time. This is the exact setup Dudley trusts for his arrows, whether he’s hunting in the backcountry or competing at the highest levels of archery.

Frequently Asked Questions: Nock On Bitzenburger Fletching Jig

What makes the Nock On Bitzenburger different from standard Bitzenburger jigs?

Each Nock On Bitzenburger comes preconfigured to John Dudley’s exact hunting and target archery specifications.

We inspect and adjust every jig before shipping to ensure it’s set up with the 4-fletch configuration with a 2.5-degree helical John uses for his arrows. This saves you time and guarantees professional results straight out of the box.

How do I know which helical option to choose?

John prefers and recommends the Right helical configuration for optimal arrow flight and broadhead performance. However, both Right and Left helical options are available if you have an established preference.

The helical direction creates spin in your arrow for improved stability, and once you choose a direction, it’s best to stay consistent with all your arrows.

How far should I position the fletching from the nock?

The Nock On arrow wraps include a convenient alignment line that provides the perfect reference point for consistent fletching placement.

For standard setups, position the back of the vane (the end closest to the nock) at this line or approximately 1–1.5 inches from the nock throat. Mark the corresponding tick mark on your clamp with a pencil for consistent placement on all your arrows.

Can I adjust the jig if I want a different fletching pattern?

Absolutely. While the jig comes preset to John’s specifications, it’s fully adjustable.

The two main dials adjust the clamp’s angle for different shaft diameters and offset preferences. The three set screws beneath the clamp control the rotation spacing (120°, 90°, or 75°×105°). Tighten the desired set screw just enough to hear the click confirmations, and back out the others until they’re flush with the edge.

How do I prevent glue buildup from affecting my fletching results?

The Bitzenburger clamp’s all-metal construction is an advantage over plastic jigs. When you notice glue buildup, use a dull knife to clean excess adhesive off the clamp. This ensures your vane sits flush in the clamp and maintains perfect alignment.

Always make sure your vane is seated all the way down in the clamp before applying it to the arrow.

Is the Bitzenburger worth the investment for occasional fletching?

The Bitzenburger is built to last decades. Many archers report using their jigs for 20+ years without issues. While cheaper options are available, the Bitzenburger’s precision, durability, and consistency make it the last fletching jig you’ll ever need to buy.

For serious archers who value perfect arrow flight, the investment pays for itself in performance and longevity.

How do I test if my fletching has the right amount of offset or helical?

A simple test is to place a vane in the clamp, position it against your arrow shaft, and trace along the edge with a pencil or marker. When you remove the clamp, you’ll see exactly what your offset or helical pattern looks like on the shaft. This helps you confirm you’re getting the proper contact between the vane and shaft along the entire length.

Become your own Bow Tech with this perfect pad to teach you to home fletch.

The Nock On Arrow Lube Tube is a must have on the range. By simply inserting your arrows into the Lube Tube, a thin layer of full synthetic arrow lube is applied to the front part of the arrow shaft and point. This very thin layer of lube allows the arrow to easily pull from targets. It is especially effective for those hard to pull targets, especially 3D foam targets. The Nock On Arrow Lube Tube kit comes with a Lube Tube with a clip for a quiver, belt, or backpack. You can also clip the Lube Tube to a Nock On Mag Clip for easy on and off to share the Lube Tube in your shooting group. It comes standard with a bottle of the synthetic arrow lube for up to 3 refills.

Max Bond is a high-viscosity liquid that is easy to work with and penetrates well when using with our tough Elastimax material. Whether you are fletching carbon or aluminum arrows, this is the toughest glue available. Use Max Bond on our Max Hunter, Pro Max, Plastifletch Max, WAV vanes. If the vane has MAX in the name you should be using our Max Bond Glue. Max Bond glue also works well with Elite Plastifletch and most other plastic vanes.

Explore your options with the Nock On Vane Sample pack. You get 13 of each of our most popular vanes to allow you to try any fletching configuration you can think up and try it out before ordering your full packs. If you don't know what vane shape and length is best for your broadheads or target set up this pack lets you try them all!

Pack Contains 13 Max Stealth, 13 Max Hunter, 13 Max 23, 13 Pro Max