Christmas Gift Guide

ATTENTION: TRAINING BAG TARGETS DO NOT QUALIFY FOR FREE SHIPPING AND ARE ONLY AVAILABLE FOR SHIPPING IN THE LOWER 48 STATES OF THE USA. DUE TO WEIGHT AND SIZE, A $26.00 SHIPPING FEE WILL BE ADDED FOR EACH BAG TARGET SHIPPED IN THE USA. TARGETS WILL BE SHIPPED DIRECTLY FROM MORRELL. PLEASE EXPECT A 2 DAY HANDLING AND PREP TIME PRIOR TO SHIPMENT. 

The Nock On Training Bag Target for field points is built in the USA in collaboration with Morrell Targets. It is a purpose built indoor/outdoor target with specific short, mid and long-range training aids that all help improve accuracy. The front side features walk back tuning lines and 4 distinct training quadrants that have multi purpose uses (see video on this page for in-depth explanation):

Top Left - Three NFAA Vegas Target Faces

Top Right - Nine 1 3/4 Inch White Aiming Dots For Close Range Shot Execution

Bottom Left - One 3 1/2 Inch Center Square & Four 2-Inch Outer Squares for "Trust the Float" Aiming Excercises & 4 Stars for Additional Aiming Targets

Bottom Right - NFAA Field Target Faces

Horizontal & Vertical Center Lines - Used For Walk Back & Bare Shaft Tuning

The back side of the target is designed for longer distance training with the following features:

One Large 10-Inch Center Dot For 60+ Yard Long Range Shooting

Four 4-Inch Outer 50-Yard Dots

Four 3 1/2-Inch 40-Yard Stars

Both sides of the target are also designed to prolong the life of the target by utilizing the entire target. The target is 27-inches tall, 25-inches wide, 15-inches deep and weighs 44 pounds. It comes equipped with an easy-to-carry handle for transport and reinforced top rivets for hanging. The target is built to take thousands of shots with field points (not suitable for broadheads), with easy to pull arrows, providing you with a purpose-built, long lasting training tool. 

Attention: Not recommended for arrows that use outserts or field points that are larger than the arrow shaft. 

The Checkmate is the stealthiest, most advanced quiver Nock On has ever produced and stands alone in the industry.

Packed with new features and technologies, this quiver was built with bowhunting in mind, giving you ease of access and peace of mind in the decisive moment.

Built to Dominate the Hunt

When you’re deep in the backcountry or up a tree at first light, your gear needs to perform.

That’s why we’ve loaded the Checkmate with features serious archers demand, starting with a super lightweight build using high modulus carbon and machined aluminum for the tightest tolerances and rock-solid performance.

We focused on the essentials: quick access, a solid mount, quiet performance, and long-lasting durability. The Checkmate is a culmination of rigorous testing and real-world experience, and it’s the quiver I rely on.

Core Benefits

• Universal adjustability for any bow model
• Speed-load arrow gripper for immediate follow-up shots
• Dead-quiet operation with rock-solid stability
• Versatile compatibility with both mechanical and fixed broadheads

Features That Set the Checkmate Apart

Grip and Go Arrow Retention

Fast rear arrow deployment for both RH and LH archers, working flawlessly with all arrow diameters while keeping your arrows secure and silent.

Speed-Load Arrow Gripper

Located on the bow mount bracket, so you always have a follow-up available, even without the quiver on your bow.

Innovative Hood Design

Engineered in an arch pattern that minimizes wind drift while attached and reduces the quiver’s overall surface area when loaded with arrows.

Blade Locker Foam

Brings innovation in material, cut, and depth. Designed to silence all types of broadheads while in the quiver, the foam keeps your mechanicals locked down and your fixed blades safe and sharp.

Built for the Elements

Constructed with high modulus carbon and machined aluminum, the Checkmate is built to take a beating season after season.

Retractable Hood Hook

The sleek and silent retractable hood hook allows this quiver to hang from anywhere, which is extremely useful in a tree stand.

Quad-Adjust System

Provides perfect quiver positioning while maintaining the tightest fit and balance, creating a stable shooting platform that enhances accuracy and confidence in the field.

Versatile Hunting Compatibility

Whether you’re hunting from a tree stand or running a mobile saddle setup, the Checkmate’s design minimizes snagging and maximizes maneuverability in any hunting situation.

Technical Specifications

• Weight: 13.6 oz (including mounting hardware)
• Material: High Modulus Carbon and Machined Aluminum
• Arrow Capacity: 5 Arrows
• Broadhead Compatibility: Mechanical and Fixed Blade
• Dexterity: LH/RH

Safety and Usage

For maximum safety and blade protection, we recommend using broadhead covers with the speed-load arrow gripper. The Checkmate’s quad-adjust system ensures your setup stays rock-solid, minimizing vibration for consistent accuracy.

Built to Outperform

When stacked against other high-end quivers, the Nock On Checkmate delivers better performance and value. It represents the pinnacle of quiver design, built with materials and manufacturing that won’t let you down when you need them most.

The Nock 2 It is one of the most popular releases on the market today and for good reason! It's been dominating the archery community due to its simplicity, comfort and its ability to tighten groups quickly. The Nock 2 It series features a custom 2 finger design, auto-closing jaw for a quick and easy attachment to your d-loop, and a wrist lanyard. The finger hole is innovated to accommodate use with a light glove while hunting in addition to adding the security of making it ideal for drawing the bow. By limiting the number of fingers you use on the release you instantly reduce the variation in your release angle and rocker position because the hand stays ergonomically correct. Simply put, by forcing repeatable hand and finger pressure you quickly recognize the repeatability downrange! Your group will never be the same again.

The Nock 2 It is one of the most popular releases on the market today and for good reason! It's been dominating the archery community due to its simplicity, comfort and its ability to tighten groups quickly. The Nock 2 It series features a custom 2 finger design, auto-closing jaw for a quick and easy attachment to your d-loop, and a wrist lanyard. The finger hole is innovated to accommodate use with a light glove while hunting in addition to adding the security of making it ideal for drawing the bow. By limiting the number of fingers you use on the release you instantly reduce the variation in your release angle and rocker position because the hand stays ergonomically correct. Simply put, by forcing repeatable hand and finger pressure you quickly recognize the repeatability downrange! Your group will never be the same again.

(Please note: shades of green may vary) 

The New Silverback Plus series is the "Worlds leading tension activated release". The Silverback Plus is a tension activated release designed specifically to help those who are striving to achieve perfect shooting technique. The Silverback Plus series activates from building continual pressure against the back wall of the bow once the safety is released to get a perfect surprise shot. This technology has led to beating buck fever and target panic better than any release on the market. The Silverback Plus is shaped to match identically with the Nock 2 It series release so the two complement one another for training and competition. Watch the videos below for easy instruction.

This Wrist Strap Combo Kit that is the ultimate upgrade for your handheld release. This allows your handheld release to transform in a Wriststrap version adding comfort, security and added consistency. The combo kit works on the Nock 2 It, Nock 2 It Mini, Silverback Plus and Silverback Plus Mini. The Nock On Custom Wrist Strap features the BOA system to easily twist the dial to your exact fit for ultimate repeatability on target but then quickly be ready for removal with a pop of the dial. The wrist strap is super comfortable and easily adjustable in the length of the release from your wrist to your hand so you have a perfect anchor. We have tailored two size straps to fit all archers perfectly.

SM/MD fits wrist 4"-6.5"

LG/XL fits wrist 6"-9"

The Back Strap is a patent pending tension activated wrist release. Engineered unlike any other wrist strap ever made, this is the ideal cure for target panic and buck fever. The design allows for the archer to draw, deactivate the safety by squeezing the trigger, and finally execute the perfect surprise shot by continuing to pull through. It is the ultimate wrist release for World-class shooting technique and accuracy.

A collaboration between Nock On and Carter Enterprises, the Back Strap combines the technology and innovation of the record selling Silverback series with the Center Pivot Trigger (C.P.S patent pending) into the ultimate index activated tension release. It features a comfortable BOA system wrist strap that allows for micro adjustment and quick removal. The wrist strap also provides easy adjustment for cord length to fit any archer and can easily be flipped to work for both RIGHT and LEFT handed.

The Back Strap can easily be adjusted to fire as light or as heavy as wanted for the surprise shot. For example, a 70lb bow with 80% let off has a holding weight of 14lbs at full draw. Simply adjust the Back Strap to fire several pounds above the holding weight. The tension screw allows the archer to adjust for his or her shooting style, providing a wide firing weight range anywhere from 10lbs to 40lbs. The Back Strap’s tension screw and C.P.S also allows the archer to use the release as a standard index trigger by simply adjusting tension screw lighter than the bows holding weight.
Combine the new Back Strap with the FREE Nock On education/training videos to become the best archer of your life. This is the one wrist strap to rule them all.

The new 2 SMOOTH hinge style back tension release with micro-adjustable head/hook/clicker position.

The new 2 Smoooth hinge style release is the 3rd installment to the Nock On release collection. This hinge has two independent moon adjustments with infinite control of both the speed and clicker length. By simply turning two screws, you have the ability to adjust both independent moons to your optimal position. The new 2 finger handle with optimized index hole position allows head position to be laid back to match the draw length of the Nock 2 it and Silverback releases. The compact head of the release has scribed index marks for precise position referencing. It also incorporates dual magnets for auto loading of the hook and head.

The Nock On Archery Release Trainer is designed to aid in practicing the release process. It is designed to simulate your exact draw length with simple adjustments ranging from 21 to 33 inches. 

The Release Trainer is designed with having the string behind the pivot point of the grip so there is not an issue with torque while enhancing the repeatability of proper technique without the fatigue of shooting a bow. 

The Release Trainer can be carried and used anywhere allowing you to get your reps in regardless of your location.

The Nock On Release Lube is a uniquely crafted formula that improves performance, eliminates friction and enhances release components for smooth, crisp shots. This proprietary formulated lubricant not only increases performance but also breaks down dirt and grime that has built up over time inside your release and creates a micro-coating that protects internal components and prevents future dirt build up. One single drop of release lube should be applied with the easy application nozzle to your Nock On Release after roughly 500 shots or after your release has been in a  dirty and/or wet environment. Learn more about the all-new High-Performance Release Lube by watching the video at the following link:    https://nockonarchery.com/how-to-use-nock-on-high-performance-release-lube/

Custom Set & Nock On Approved

The Nock On Custom Bitzenburger arrow fletching jig is a high-precision, bullet proof designed arrow fletching jig. Each jig has been fully preset to the exact specs of John Dudley's personal arrow builds. Jigs are available in either a Right or Left helical option. Directly out of the box you will be able to start fletching a 4 fletch 2.5 degree with without any adjustments. Each Jig is fully inspected and ready to go. If you choose to use your own configuration, you can either watch our set up video or follow the written directions for an endless variety of fletching options. These jigs are specific to either a Right or Left hand helical and don't alternate without and addition clamp. * John personal prefers the RIGHT helical configuration.

Become your own Bow Tech with this perfect pad to teach you to home fletch.

Make fletching easier with The Nock On Glue Stand. Made with powder-coated stainless steel that easily bends to perfectly hold your fletching glue so it's always on the ready!

Max Bond is a high-viscosity liquid that is easy to work with and penetrates well when using with our tough Elastimax material. Whether you are fletching carbon or aluminum arrows, this is the toughest glue available. Use Max Bond on our Max Hunter, Pro Max, Plastifletch Max, WAV vanes. If the vane has MAX in the name you should be using our Max Bond Glue. Max Bond glue also works well with Elite Plastifletch and most other plastic vanes.

The Max 23 is an awesome crossover vane bridging the gap between the ProMax and Max Stealth. This low profile 23 is designed to be perfect for long range accuracy with minimal horizontal drift while still giving the control needed for mechanical broadheads.

Quantity-50 vanes per pk. 

Weight 5 grains

The Max23 is an awesome crossover vane bridging the gap between the ProMax and Max Stealth. This low profile 23 is designed to be perfect for long-range accuracy with minimal horizontal drift while still giving the control needed for mechanical broadheads. This is the perfect vane for archers wanting a vane to compete during their offseason shoots and still be hunting ready with compact fixed heads and all mechanical broadheads.
The lower weight of the Max23 is perfect for offsetting the use the lighted nocks and also giving you options for lightweight 4 or 6 fletch configurations.

The new Nock On Wraps are designed with cheat lines to align the back of your vane with the black line on the wraps. There is also a pre-marked tick for trimming our wraps for shorter vanes. please see video to see how awesome they work. The Nock On Custom Wraps work perfectly with arrows up to 6mm, Nock On Vanes, Wraps and Max Bond glue. These custom wraps are 1"x 4.5" and perfect for diameters up to a 6mm FMJ/Axis. QTY 12 per pack

Weighs 4.5 grains

The new Nock On Wraps are designed with cheat lines to align the back of your vane with the black line on the wraps. There is also a pre-marked tick for trimming our wraps for shorter vanes. please see video to see how awesome they work. The Nock On Custom Wraps work perfectly with arrows up to 6mm, Nock On Vanes, Wraps and Max Bond glue. These custom wraps are 1"x 4.5" and perfect for diameters up to a 6mm FMJ/Axis. QTY 12 per pack

Weighs 4.5 grains

The Nock On Nation Wraps are designed with cheat lines to align the back of your vane with the black line on the wraps. There is also a pre-marked tick for trimming the wraps for shorter vanes. The Nock On Custom Wraps work perfectly with arrows up to 6mm, Nock On Vanes, Wraps and Max Bond glue. These custom wraps are 1"x 4.5" and perfect for diameters up to a 6mm FMJ and Axis Easton Arrows. QTY 12 per pack. Weighs 4.5 grains

The new Nock On Wraps are designed with cheat lines to align the back of your vane with the black line on the wraps. There is also a pre-marked tick for trimming our wraps for shorter vanes. Please see video to see how awesome they work. The Nock On Custom Wraps work perfectly with arrows up to 6mm, Nock On Vanes, Wraps and Max Bond glue. These custom wraps are 1"x 4.5" and perfect for diameters up to a 6mm FMJ/Axis. QTY 12 per pack. 

Weighs 4.5 grains

The new Nock On Wraps are designed with cheat lines to align the back of your vane with the black line on the wraps. There is also a pre-marked tick for trimming our wraps for shorter vanes. please see video to see how awesome they work. The Nock On Custom Wraps work perfectly with arrows up to 6mm, Nock On Vanes, Wraps and Max Bond glue. These custom wraps are 1"x 4.5" and perfect for diameters up to a 6mm FMJ/Axis. QTY 12 per pack.

Weighs 4.5 grains

The Nock On Archery Magnetic-Clip is the easiest way to clip anything together including rangefinder, arrow puller, car keys, arrow lube, game call, etc. These two super strong magnets allow you to detach and reattach everything back together with ease. There are countless uses for the Nock On Archery Magnetic-Clip.

Available in Green or Black.

 

This Nock On exclusive pack contains one green and one white bright LED light hat clip. It has a built-in 15-degree angle tilt, weighs less than 1 oz and easily clips on to any hat brim. Batteries Included

• 25 Lumens
• 5 Super bright LED's with built-in 15-degree angle tilt
• Top mount design, does not obstruct vision
• 118 minutes burn time
• Powered by (2) two CR-2016 batteries ( included)

When accuracy and penetration are non-negotiable, these Nock On Hand-Fletched Axis Match Grade arrows stand alone in precision and build quality.

Each arrow shaft comes from a three-mile continuous run of high modulus carbon with match-grade tolerances — the highest standard Easton produces and is made in the USA.

Built to John Dudley’s exact personal specifications, these arrows are custom cut and hand-fletched with unwavering attention to detail, delivering the tightest groups you’ve ever shot. With brass inserts standard for enhanced FOC and a 4-fletch configuration with 2.5° right helical, these arrows are ready to deliver lethal accuracy whether you’re in the backcountry or on the tournament line with a whisper-quiet flight.

Core Benefits

• Match-Grade Precision: Produced from single-spool, continuous carbon runs, ensuring perfect shaft consistency
• Enhanced Penetration: Standard brass inserts boost FOC and overall weight for superior downrange performance
• Competition-Ready Build: Hand-fletched to John Dudley’s personal arrow specifications using Nock On Certified components
• Field-Proven Quality: Built with 5mm micro-diameter carbon-composite fibers for durability and accuracy

Feature Breakdown

Premium Match-Grade Construction

Each shaft comes from a brand-new carbon spool that produces over three miles of continuous material, cut in sequence to ensure perfect shaft consistency. This proprietary process delivers unmatched accuracy through identical spine and weight characteristics across every arrow in your set.

Professional Hand-Fletching Process

Built using Nock On Certified wraps and Max Stealth Vanes in a 4-fletch configuration with 2.5° right helical. This proven fletching setup provides superior stability and broadhead accuracy.

Each arrow is hand-fletched to match John Dudley’s competition and hunting specifications. This outperforms competitors’ pre-fletch alternatives, which must sacrifice types of vanes, glues, and vane offsets due to what a machine will allow.

Advanced Component Integration

Every arrow includes pre-installed brass HIT inserts with break-off weight adjustment options, Broadhead Adapter Rings (BAR), and pre-installed green 5mm (X) nocks. This complete system ensures maximum accuracy and consistent broadhead alignment.

Technical Specifications

Arrow Specifications

• Straightness: +/-.001″
• Construction: 5mm micro-diameter carbon-composite fibers
• Fletching: 4-fletch configuration, 2.5° right helical

Components: Brass 50/75 Grain Break-off HIT 8*32 insert, BAR, green 5mm (X) nocks

Size Chart

Size	Shaft Weight (GPI)	BAR	O.D.
400	9.0	BAR 4	0.264
340	9.5	BAR 5	0.267
300	10.7	BAR 5	0.275
260	11.5	BAR 6	0.280

 

Important Notes

• Up to a 2-business day build time is required
• Contact phone number MUST be provided for order confirmation and specifications
• Hand-fletched arrows are non-returnable once specifications are confirmed
• All sales are final

Ready to go, hand fletched Nock On Custom Archery match grade FMJ Arrows. Fletched with Nock On Certified wraps and Max Stealth Vanes. Arrows will be cut to length with inserts installed. MUST PROVIDE CONTACT NUMBER for order confirmation and specifications. 2-business day build time to be expected.

4 Fletch configuration w/ 2.5 degree right helical.

6ct with Brass HIT inserts installed and BAR rings.

The Nock On PRO FULL METAL JACKET is a 5mm arrow with a carbon core and aluminum outer jacket. The Pro FMJ has Match Grade Straightness (.001+-) and weight tolerance with heart-stopping penetration. The heavy hitting FMJ flies with less wind drift and minimizes friction for deeper penetration. The standard brass inserts give you a boosted F.O.C for better long range ballistics.

These arrows are hand-fletched to the exact specs of John Dudley's personal arrows and can be refletched with the same spec using the Nock On certified Bitzenburger arrow jig.

*Hand-Fletched arrows are not returnable once you have confirmed arrow specifications. All sales are final.

Features Include:

• Straightness +/-.001"
• BRASS 50/75 Grain Break-off HIT 8*32 insert
• Pre-installed green 5mm ( X ) nocks
• Broadhead Adapter Rings (BAR)
• Spine Sizes Available: 400-340-300-250

Comes Standard with a BAR and a 5mm Brass X Hit break off insert 75 or 50 grains

Size	Shaft Weight (GPI)	BAR	O.D.
400	10.2	BAR 3	0.263
340	11.3	BAR 5	0.269
300	12.0	BAR 5	0.273
250	11.5	BAR 5	0.273