The Nock On Archery Release Trainer is designed to aid in practicing the release process. It is designed to simulate your exact draw length with simple adjustments ranging from 21 to 33 inches. 

The Release Trainer is designed with having the string behind the pivot point of the grip so there is not an issue with torque while enhancing the repeatability of proper technique without the fatigue of shooting a bow. 

The Release Trainer can be carried and used anywhere allowing you to get your reps in regardless of your location.

Nock On Custom Branded Patch on a black/white Richardson 112 adjustable snapback hat. A classic, clean, and minimalist black and white style. 

• 60/40 cotton/polyester
• 100% polyester mesh back
• Structured, mid-profile, six-panel
• Pre-curved contrast stitched visor
• Underbill matches the color of visor
• Adjustable plastic snapback

Nock On Back Strap Tension-Activated Wrist Release

Tension-Activated Performance for Wrist Strap Shooters

The Nock On Back Strap solves one of archery’s biggest problems: starting with a wrist strap release that leads to punching the trigger and freezing on target.

This tension-activated wrist release brings proven back tension principles to a comfortable wrist strap design. After years of coaching archers through target panic issues, we’ve built a release that lets you safely draw, anchor properly, and get a true surprise shot every time.

When that buck steps into range, this release delivers rock-solid performance.

What This Release Does

• Stops Target Panic: Eliminates freezing and punching by forcing a surprise break.
• Works Two Ways: Use it as a tension-activated or standard index trigger with one adjustment.
• Fits Perfect Every Time: The BOA system gives you an exact fit, whether you’re in a T-shirt or layers.
• Built for Hunting: Compact, quiet, and tested in real hunting situations.

The Back Strap Advantage

Center Pivot Safety System

The Back Strap uses a practical safety system that actually works in the field. Draw your bow with your finger behind the trigger, anchor solid, then squeeze the trigger to deactivate the safety. Now pull back against the wall to your preset weight until your shot breaks with a total surprise — no punching, no freezing, just a clean break.

This release brings proper shooting technique to a wrist strap design, giving you the benefits of back tension while keeping the familiar feel many hunters prefer.

BOA Wrist Strap

We’ve licensed a BOA strap system that flat-out works in the field. It’s the same tech used in quality snowboard boots and running shoes, so you know it’s built to last.

Just push the dial and tighten it to your comfort level, whether you’re in a T-shirt or bundled up. Done shooting? Just lift the dial, hear the click, and slide your hand right out.

No more fumbling with Velcro or D-loops that never hit the right spot. This is comfortable, quiet, and built for real hunting conditions.

Simple Tension Adjustment

The Back Strap uses the same internal mechanism as our Silverback Plus series, giving you tension adjustment from nine up to 40 pounds of pull tension with just one spring. No need to swap springs or components. Just turn the Allen wrench and you’re set.

A little adjustment goes a long way — usually just a quarter turn makes a noticeable difference. For best results of firing tension, set it about four to six pounds over your bow’s holding weight (e.g., if you’re at 80% let-off on a 70-pound bow, you’re holding 14 pounds, so set the release around 18-20 pounds, which is right where it comes out of the package).

Compact Open-Hook Design

The Back Strap is built super compact — no more bulky releases hanging off your wrist. The open-hook design makes loading onto your D-loop quick and clean, even with cold hands or low light. Just hook and go. The jaw opens smoothly and reliably every time.

We’ve kept everything tight and minimal without sacrificing durability, because we know this release needs to perform season after season in tough conditions.

The jaw is a reverse design that opens away from your face, giving you ideal clearance with a beard or face mask.

Two Releases in One

What really separates the Back Strap from anything else out there is that you can use it two ways: Set it up for proper tension activation to build good habits and eliminate target panic, or quickly adjust it to work just like a standard index release if that’s what you need for a specific hunting situation.

This isn’t just a release. It’s also the ultimate training tool that’ll improve your shot process. Perfect for new shooters avoiding bad habits or experienced archers looking to clean up their form.

Tech Specs

• Tension Range: Nine to 40 pounds firing weight (single spring — no need to swap parts)
• Wrist Fit: BOA system adjusts to fit virtually any archer
• Conversion: Easily switches between right- and left-handed use
• Size: Super compact, minimal bulk on your wrist
• Compatibility: Works with any standard D-loop
• Included: Allen wrench for all adjustments
• Operation: Safety-based system with continuous pull activation
• Wrist Sizes: Fits wrists as small as 5.75″ up to large adult sizes

Using the Back Strap

The Back Strap works in a straightforward, practical way:

1. Draw and Anchor: Finger behind the trigger, draw back, and anchor with your index knuckle at the base of your earlobe.
2. Squeeze: Squeeze the trigger to deactivate the safety but not fire the arrow.
3. Pull: While aiming on target, keep pulling against the back wall, focusing on your elbow moving straight back.
4. Let It Break: The shot breaks clean with a surprise release when you pull to the preset weight.

Need to use it like a standard index trigger release? Just back out the tension screw until it’s about flush with the casing, tighten the set screw, and you’re good to go. It works just like the wrist strap you’re used to.

Why I Developed the Back Strap

Through years of coaching, I’ve seen one problem more often than any other: new archers starting with a wrist strap release, developing the habit of punching the trigger, and ending up with target panic or buck fever.

The Back Strap fixes this issue by bringing proper back tension principles to a familiar wrist strap design.

The concept is simple but powerful: Trust your pin float, pull through the shot, and let it break with a surprise. This is the same technique used by top competitive archers worldwide and now available in a format that works for both training and hunting.

If you’ve struggled with freezing under the target or punching your release, or if you just want to build better shooting habits from the start, the Back Strap will help you get there. No gimmicks, no compromises — just solid technique built into a practical design that performs when it matters.

Frequently Asked Questions: Nock On Back Strap

How does the BOA wrist strap system work? Is it durable?

The BOA system is incredibly durable — it’s the same technology used in high-end snowboard boots and cycling shoes.

To tighten, just push down on the BOA dial and rotate for perfect micro-adjustment. For removal, simply lift the BOA dial until it clicks and slide your hand out. This allows for much better adjustability than traditional Velcro straps, especially when wearing different clothing layers or gloves.

Will I need to adjust my anchor position or peep height when switching to the Back Strap?

Most archers can use their existing peep setup without changes. For proper form, place your index knuckle at the base of your earlobe, with your thumb slightly relaxed under your jawline. This position typically maintains your existing peep height.

If needed, you can make minor D-loop adjustments more easily than with handheld releases, since wrist releases don’t create the same string torque concerns.

What’s the tension adjustment range, and how do I set it properly?

The Back Strap adjusts from nine to 40 pounds with a single spring — no need to swap components like with older releases. One full turn changes the activation weight by approximately 10 pounds, so small adjustments make a big difference.

For most setups, set it to fire at four to six pounds over your bow’s holding weight. For example, if you’re shooting a 70-pound bow with 80% let-off (14 pounds holding weight), start with the tension around 19–20 pounds, which is how it comes out of the package.

Can I still let down safely after I’ve deactivated the safety?

Absolutely. After drawing and squeezing the trigger to deactivate the safety, you can simply release pressure on the trigger to re-engage the safety, allowing you to let down safely. This makes the Back Strap practical for hunting situations where you might need to hold and then let down.

Will my point of impact change compared to other releases?

Yes, you’ll likely notice a different point of impact compared to other releases. This follows the common archery principle that when you change anything, you change everything.

Most right-handed shooters find they hit slightly left with the Back Strap compared to handheld releases. Adjust your sight accordingly, and consider marking your sight or counting clicks so you can quickly switch between releases if needed.

How does the Back Strap compare to the Silverback Plus handheld release?

Both releases use the same internal tension mechanism, but determining which one is better comes down to personal preference.

The Back Strap is ideal if you prefer having your release always attached to your wrist or you’re transitioning from a traditional wrist strap. The Silverback Plus might be better if you prefer a handheld release’s feel and anchor position. Both provide the same tension-activated surprise shot, just with different anchor positions and handling characteristics.

Is the Back Strap suitable for smaller archers, youth, or women?

Yes. The BOA system accommodates wrists as small as 5.75″ in diameter, making it comfortable for youth archers, women, and anyone with smaller wrists. The adjustable cord length also ensures proper trigger positioning regardless of hand size.

The Nock On Release Lube is a uniquely crafted formula that improves performance, eliminates friction and enhances release components for smooth, crisp shots. This proprietary formulated lubricant not only increases performance but also breaks down dirt and grime that has built up over time inside your release and creates a micro-coating that protects internal components and prevents future dirt build up. One single drop of release lube should be applied with the easy application nozzle to your Nock On Release after roughly 500 shots or after your release has been in a  dirty and/or wet environment. Learn more about the all-new High-Performance Release Lube by watching the video at the following link:    https://nockonarchery.com/how-to-use-nock-on-high-performance-release-lube/

This Nock On exclusive pack contains one green and one white bright LED light hat clip. It has a built-in 15-degree angle tilt, weighs less than 1 oz and easily clips on to any hat brim. Batteries Included

• 25 Lumens
• 5 Super bright LED's with built-in 15-degree angle tilt
• Top mount design, does not obstruct vision
• 118 minutes burn time
• Powered by (2) two CR-2016 batteries ( included)

I LOVE ARCHERY written in the archery essentials. I mean who doesn't, right? 

Ultra soft semi fitted Next Level Tee. 60% Combed Ring-Spun Cotton 40% Polyester.

 

Nock On Custom Built Archery Gear red/white/blue Patch on a Charcoal/Black Richardson 112 adjustable snapback hat. A retrospective and patriotic patch on a neutral background.

• 60/40 cotton/polyester
• 100% polyester mesh back
• Structured, mid-profile, six-panel
• Pre-curved contrast stitched visor
• Underbill matches the color of visor
• Adjustable plastic snapback

A beautiful green shirt featuring the Nock On Custom Archery geometric logo over a mountainous background. If you look closely, you can see Dudley on the TAC range!(Imagination required)

Ultra soft semi fitted Next Level Tee. 60% Combed Ring-Spun Cotton 40% Polyester.

 

A classic Nock On shirt. Essential for any OG collection. This shirt has been with us since the start. 

Ultra soft semi fitted Next Level Tee. 60% Combed Ring-Spun Cotton 40% Polyester.

 

 

The all new Patriot hat features an all weather ECO friendly PVC patch. Built on a on a Black and White YP Classics adjustable snapback hat. A vertex of aesthetic geometric patriotism. 

• 65/35 polyester/cotton
• Matching undervisor
• Mesh back
• Structured, mid-profile, six-panel
• Permacurv visor
• Snapback closure

Our Nock On Nation Flag with faded details featured on a sandy brown tee. 

Ultra-soft, semi fitted Next Level Tee. 60% Combed Ring-Spun Cotton 40% Polyester.

 

Rep your favorite release with the Silverback tee! The spirit animal of Nock On Archery. 

Ultra-soft semi fitted Next Level Tee. 60% Combed Ring-Spun Cotton 40% Polyester.

 

A classic and a must have for your Nock On Archery merch collection. Peep the details! 

60% Combed Ring-Spun Cotton 40% Polyester. Comfortable ultra soft semi fitted Next Level Tee. 

 

Nock On Custom Built Archery Gear red/white/blue Patch on a red/white/blue Richardson 112 adjustable snapback hat. A retrospective and patriotic patch on an equally patriotic background.

• 60/40 cotton/polyester
• 100% polyester mesh back
• Structured, mid-profile, six-panel
• Pre-curved contrast stitched visor
• Underbill matches the color of visor
• Adjustable plastic snapback

12" Beanie with 3" Adjustable Cuff, featuring a vibrant geometric Nock On woven patch in the center. 

100% Acrylic Knit beanie. 

When accuracy and penetration are non-negotiable, these Nock On Hand-Fletched Axis Match Grade arrows stand alone in precision and build quality.

Each arrow shaft comes from a three-mile continuous run of high modulus carbon with match-grade tolerances — the highest standard Easton produces and is made in the USA.

Built to John Dudley’s exact personal specifications, these arrows are custom cut and hand-fletched with unwavering attention to detail, delivering the tightest groups you’ve ever shot. With brass inserts standard for enhanced FOC and a 4-fletch configuration with 2.5° right helical, these arrows are ready to deliver lethal accuracy whether you’re in the backcountry or on the tournament line with a whisper-quiet flight.

Core Benefits

• Match-Grade Precision: Produced from single-spool, continuous carbon runs, ensuring perfect shaft consistency
• Enhanced Penetration: Standard brass inserts boost FOC and overall weight for superior downrange performance
• Competition-Ready Build: Hand-fletched to John Dudley’s personal arrow specifications using Nock On Certified components
• Field-Proven Quality: Built with 5mm micro-diameter carbon-composite fibers for durability and accuracy

Feature Breakdown

Premium Match-Grade Construction

Each shaft comes from a brand-new carbon spool that produces over three miles of continuous material, cut in sequence to ensure perfect shaft consistency. This proprietary process delivers unmatched accuracy through identical spine and weight characteristics across every arrow in your set.

Professional Hand-Fletching Process

Built using Nock On Certified wraps and Max Stealth Vanes in a 4-fletch configuration with 2.5° right helical. This proven fletching setup provides superior stability and broadhead accuracy.

Each arrow is hand-fletched to match John Dudley’s competition and hunting specifications. This outperforms competitors’ pre-fletch alternatives, which must sacrifice types of vanes, glues, and vane offsets due to what a machine will allow.

Advanced Component Integration

Every arrow includes pre-installed brass HIT inserts with break-off weight adjustment options, New Stainless Steel Match Collars, and pre-installed green 5mm (X) nocks. This complete system ensures maximum accuracy and consistent broadhead alignment and added durability.

Technical Specifications

Arrow Specifications

• Straightness: +/-.001″
• Construction: 5mm micro-diameter carbon-composite fibers
• Fletching: 4-fletch configuration, 2.5° right helical
• Components: Brass 50/75 Grain Break-off HIT 8*32 insert, Stainless Steel Match Collars, green 5mm (X) nocks

Size Chart

Size	Shaft Weight GPI	Collar	O.D.
400	9.0	Match 2	0.264
340	9.5	Match 2.5	0.267
300	10.7	Match 4	0.275
260	11.5	Match 5	0.280

Important Notes

• Up to a 2-business day build time is required
• Contact phone number MUST be provided for order confirmation and specifications
• Hand-fletched arrows are non-returnable once specifications are confirmed
• All sales are final

Expert-Built Arrows That Deliver When It Counts

These hand fletched match grade Full Metal Jacket (FMJ) arrows are the exact arrow setup John Dudley relies on for successful shooting and bowhunting.

Built with meticulous attention to detail, these pro-level arrows are cut to your specified length with inserts installed and ready to shoot right out of the box. Each set delivers match grade straightness (.001+/-) and weight tolerance for unmatched accuracy and penetration performance.

The 5mm FMJ combines a carbon core with an aluminum outer jacket that reduces wind drift and friction for deeper penetration. Each arrow is hand fletched in a 4-fletch configuration with 2.5-degree right helical using Nock On Certified wraps and Max Stealth Vanes, the exact specs from John’s personal setup.

Core Benefits

• Match grade straightness (.001+/-) and tight weight tolerance for field-proven accuracy
• Pre-installed brass HIT inserts boost Front of Center (FOC) for improved long-range ballistics
• Aluminum outer jacket reduces friction for deeper penetration on game
• Hand fletched 4-fletch configuration steers broadheads with precision

The FMJ Advantage

Heavy-Hitting Performance

The FMJ arrow has a heavier overall mass weight compared to standard carbon arrows, giving you increased momentum and penetration power. This extra weight translates to knockdown performance on big game.

With its aluminum sleeve over carbon construction, the FMJ remains John’s go-to choice for elk, moose, and any hunting situation where maximum penetration matters.

“The FMJ is just a demolisher,” John says. “These are heavier overall... and in the field, this thing rams through some serious stuff.”

Friction-Reducing Aluminum Jacket

The aluminum outer jacket on the FMJ reduces friction during penetration compared to standard carbon arrows. This friction reduction, combined with the arrow’s increased mass, creates the perfect combination for punching through game.

The smooth aluminum surface also makes these arrows much easier to pull from targets during practice sessions, particularly from 3D targets in colder temperatures.

4-Fletch Configuration

Each arrow features our precision 4-fletch setup with a 2.5-degree right helical, using Max Stealth Vanes for optimal broadhead steering.

This configuration corrects arrow flight faster than traditional 3-fletch setups and allows you to shoot multiple broadhead types with consistent accuracy.

The 4-fletch pattern compensates for minor tuning variations, giving you more confidence when it matters most.

Brass HIT Insert System

Every FMJ comes standard with pre-installed brass 50/75 grain break-off HIT 8*32 inserts. These custom brass inserts, developed by John himself, boost Front of Center (FOC) weight distribution for improved long-range accuracy.

The inserts are installed using premium hot melt that allows for broadhead indexing if needed. Just warm the insert to adjust broadhead alignment.

Stainless Steel Match Collars

Brace for Impact- The NEW Easton Match Grade HIT Collars. Easton’s new Match Grade HIT Collar are designed to increase the impact strength of an arrow using the HIT system. Built out of hardened stainless steel. Come in 6 sizes to accommodate all 5mm Easton Arrows. Included with Easton Match Grade 5mm Arrows. Fits 17/64 & 5/16 Field Points. All Nock On 5MM arrows come standard with the new Match Grade Steel Collars.

Match Grade Quality

These aren’t ordinary arrows. They’re match grade with a guaranteed straightness tolerance of +/-.001″.

Each batch of FMJs comes from a continuous 3-mile spool of carbon, cut in sequence to ensure spine and weight consistency. This manufacturing process creates arrows that are “perfect clones” of each other, eliminating variables and maximizing accuracy.

Technical Specifications

• Arrow Diameter: 5mm (0.197″)
• Spine Options: 400, 340, 300, 250
• Straightness: +/- .001″ (match grade)
• Pre-installed Components: Brass 50/75 Grain Break-off HIT 8*32 inserts, green 5mm (X) nocks, Stainless Steel Collars
• Fletching: 4-fletch configuration with 2.5-degree right helical
• Vanes: Max Stealth
• Quantity: 12 count

Size Chart

Size	Shaft Weight GPI	Collar	O.D.
400	10.2	Match 2	0.263
340	11.3	Match 3	0.269
300	12.0	Match 4	0.273
250	11.5	Match 3	0.273

Spine Selection Guide

The FMJ 300 spine at 29.5″ with 75 grains of brass and a 100-grain point weighs approximately 570 grains. With 50 grains of brass instead of 75, the same arrow weighs about 545 grains.

These weights don’t include lighted nocks, which add approximately 12 grains if installed.

Professional Performance

John doesn’t just sell these arrows. He relies on them personally.

“I’m not building my own arrows anymore,” he explains. “I walk in the shop, I get these exact arrows, and I take them and shoot them.”

The hand fletched FMJ arrows require no additional tuning or knock indexing. They’re ready to deliver tight groups straight from the package.

Note: Custom-built arrows are non-returnable once specifications are confirmed.

Hand Fletched FMJ Match Grade Arrows: Frequently Asked Questions

Are these arrows worth the higher price compared to standard carbon arrows?

YES, No Doubt! These aren’t the cheapest arrows on the shelf, but they are hand built as identical clones that perform so consistently that John Dudley himself trusts them completely. They’ve put meat in his freezer for years.

When you factor in the match grade straightness, the hand fletching, and the fact that these arrows are ready to shoot right out of the box, you’re getting an incredible value.

Would you rather spend a little more on arrows that perform when it counts, or would you rather save money and lose the shot of a lifetime?

How much heavier are these compared to my current carbon arrows? Will that affect my shooting?

The FMJ 300 spine, at 29.5″ with 75 grains of brass and a 100-grain point weighs approximately 570 grains, is heavier than most carbon setups.

You’ll need to adjust your sight pins, and you’ll have more arc at longer distances. But you gain devastating penetration and momentum that demolishes whatever it hits.

The FMJ is a heavy hitter by design. If you’re hunting big game or want maximum penetration, that extra weight is your friend. Lighter arrows give you a flatter trajectory, but heavier arrows give you more knockdown power.

Can I shoot these arrows in cold weather without issues?

Absolutely. Compared to standard carbon arrows, these arrows are easier to pull from targets in cold weather.

The aluminum outer jacket reduces friction, which means less wrestling with stuck arrows during winter practice sessions. The aluminum jacket also helps with durability in extreme temperatures.

John has shot these in everything from Texas heat to Canadian cold, and they perform consistently.

Do I need to re-tune my bow when switching to these arrows?

You’ll likely need some tuning adjustments because of the weight difference, but the 4-fletch configuration is forgiving. The 4-fletch setup corrects arrow flight faster than traditional 3-fletch and compensates for minor tuning variations. Most archers can get these flying well with minimal adjustments.

The match grade straightness and weight consistency means they stay consistent once you get them tuned. Just make sure you select the right spine for your setup.

Are these overkill for whitetail deer?

There’s no such thing as “too much penetration” when it comes to ethical hunting. Yes, these arrows will demolish a whitetail, but that’s what you want. Complete pass-throughs mean better blood trails and quicker recoveries.

John has used these arrows on every animal from whitetails to elk. The confidence you get knowing your arrow will punch through whatever it hits is unmatched. The quiet flight characteristics also help. Deer don’t pick up the sound like they do with lighter arrows.

How long will these arrows last with regular practice?

These arrows are built tough. The aluminum outer jacket protects the carbon core and makes them more durable than standard carbon arrows. They’re easier to pull from targets, which reduces stress on the arrow during practice.

If you practice a lot in field conditions, you might break a few here and there, but that’s true of any arrow. The durability you get with the FMJ construction is definitely above average.

Sonic KE — Fully Loaded — Ready-to-Group Arrows (12ct)

Field-Tested Performance, Factory-Ready Precision

The Nock On Sonic KE arrows deliver exactly what serious bowhunters need — rock-solid consistency, enhanced downrange performance, and hard-hitting impact that gets the job done when it counts.

John Dudley designed these 6mm super straight arrows to be deadly accurate right out of the box, with pre-fletched 3″ Nock On Hybrid vanes that guarantee tight groups in the triple digits. Built in the USA using Easton’s seamless ACU-Carbon process, these shafts give you 100% weight and spine consistency from shaft to shaft and dozen to dozen, so you can trust every arrow in your quiver.

Save Big, Lose Nothing

The Sonic KE gives you all the accuracy at the best price. These arrows are priced right, with you getting big benefits without losing on straightness or weight tolerances.

Sonic KE Arrows Core Benefits

• Enhanced Kinetic Energy: Standard 75/50-grain brass inserts boost FOC up to 25% for superior downrange ballistics and momentum through your target.
• Premium-Grade Construction: SELECT GRADE shafts (+-.0015) presorted from the factory for exceptional straightness and weight consistency.
• Versatile Performance: Perfect balance of speed and impact for everything from Total Archery Challenges to taking down large game animals.
• Ready to Hunt: Factory pre-fletched with AAE 2.7″ Stealth Hybrid 3-degree right helical in a 3-fletch configuration.

Maximum Front-End Weight Options

The Sonic KE comes standard with custom 75/50 break-off inserts, giving you control over your setup based on your shooting needs. These inserts allow you to boost your FOC dramatically while maintaining optimal overall arrow weight. The shaft’s lighter mass weight compared to Axis or FMJ arrows means you can run the full 75 grains up front and still maintain the total arrow weight you’re used to.

When you choose the full 75 grains of brass, you’ll get 25% more FOC compared to standard arrows with 50 grains of brass. This means better wind-cutting ability and increased momentum that carries through your target — exactly what you need when it matters most.

Spine Selection Tip: For maximum performance with the 75-grain inserts, select one spine size stiffer than your normal arrows with aluminum inserts.

High-Performance American-Made Shafts

The Sonic KE arrows are built using Easton’s proven AccuCarbon process right here in the USA. This means guaranteed straightness and weight tolerances from shaft to shaft and dozen to dozen. These 6mm shafts provide the perfect balance — stiff enough for consistent accuracy but light enough to maintain speed with the heavier front end.

Each arrow is a SELECT GRADE shaft (+-.0015) that’s presorted at the factory, giving you only the highest quality shafts for straightness and weight consistency. This tight tolerance control eliminates variables from your shooting equation, allowing you to focus on your shot execution rather than worrying about arrow inconsistency.

Versatile Applications

Whether you’re heading to a Total Archery Challenge, shooting 3D, or hunting big game, these arrows deliver the performance you need.

The lighter shaft weight combined with the heavy front end gives you options that weren’t possible before, maintaining speed for longer distances while still getting the penetration and durability benefits of higher FOC.

For hunting setups, the increased FOC dramatically improves flight stability and penetration on game animals. For competition, you’ll get the accuracy benefits of premium-grade arrows at a price point that won’t break the bank.

Factory Pre-Fletched for Immediate Results

Every Sonic KE arrow comes pre-fletched with AAE 2.7″ Stealth Hybrid vanes in a 3-fletch configuration with a perfect 3-degree right helical. This setup delivers proven accuracy at an accessible price point.

The fletch profile provides excellent stability without sacrificing speed, giving you the best of both worlds.

Technical Specifications

• Construction: 6mm diameter carbon shaft with ACU-Carbon process
• Insert System: 75/50 grain break-off brass insert (75 grain standard)
• Fletching: AAE 2.7″ Stealth Hybrid, 3-fletch, 3° right helical
• Straightness: SELECT GRADE (+-.0015)
• Spine Options: Available in 400, 340, 300, and 250 spines (select one spine stiffer than usual when using 75-grain inserts)
• Weight: Lighter overall mass weight than comparable Axis or FMJ arrows
• Quantity: 12 arrows per pack

Size Chart

Size	Shaft Weight GPI	O.D.
400	7.2	0.275
340	7.8	0.279
300	8.8	0.286
250	9.5	0.291

Performance Summary

The Sonic KE gives you options other arrows can’t match. Go with 75 grains up front for maximum FOC and penetration, or break off to 50 grains when you need more speed.

This arrow is designed based on what actually works in the field — no marketing hype required; just field-tested performance that delivers when it counts.

These arrows represent the perfect balance of performance and value — premium-grade shafts with the features serious bowhunters need at a price point that makes sense. Whether you’re chasing bulls in the mountains or competing at the highest level, the Sonic KE has the consistency and performance to get it done.

Nock On Sonic KE Arrows: Frequently Asked Questions

What spine size should I choose for the Sonic KE arrows?

When using the full 75-grain brass inserts, we recommend selecting one spine size stiffer than you would normally shoot. This compensates for the additional front weight that weakens the arrow’s effective spine.

For example, if you typically shoot a 300 spine with 50 grains of brass up front, consider going to a 250 spine when using the whole 75 grains of brass with the Sonic KE.

How do Sonic KE arrows compare weight-wise to Axis or FMJ arrows?

The Sonic KE has a lighter overall mass weight than comparable Axis or FMJ arrows. For example, a 250-spine Sonic KE weighs approximately 9.5 grains per inch compared to 11.7 grains per inch for a 5mm Axis.

This lighter shaft weight allows you to add more weight up front (75 grains vs. 50 grains) while maintaining a similar total arrow weight to what you’re used to with heavier shafts.

Can I modify the fletching on the pre-fletched Sonic KE arrows?

Yes. While the arrows come pre-fletched with a 3-fletch AAE 2.7″ Stealth Hybrid vane in a 3-degree right helical, you can certainly strip these fletches and modify them to your preferences. John Dudley does this for some of his applications, such as switching to a 4-fletch configuration or using different vanes for specific shooting scenarios.

What makes the FOC (forward of center) advantage important?

The Sonic KE arrows with the full 75-grain brass insert can achieve up to 25% more FOC compared to standard arrows with 50 grains up front. This increased FOC provides several performance advantages:

• Better stability and accuracy in windy conditions
• Improved penetration and momentum transfer for hunting applications
• More consistent arrow flight, especially at longer distances
• Maintained downrange energy for taking down large game animals

How versatile are the Sonic KE arrows for different applications?

The Sonic KE arrows are designed to excel in multiple archery disciplines. The arrow’s base construction provides the consistency needed for both hunting and precision target shooting.

For hunting, the higher FOC option with 75 grains up front provides the penetration and momentum needed for large game animals. For target competitions like the Total Archery Challenge, you can opt for the 50-grain configuration to gain more speed while maintaining excellent accuracy.

What are the break-off inserts? How do they work?

The Sonic KE arrows come standard with 75/50 grain break-off brass inserts. These inserts allow you to customize the weight at the front of your arrow based on your needs:

• Use the full 75 grains for maximum FOC and penetration when hunting.
• Break off 25 grains to reduce to 50 grains of brass when you need more speed for longer distance target shooting. This versatility allows one arrow system to serve multiple purposes and adapt to different shooting scenarios.

Are these arrows ready to shoot right out of the box?

Yes. The Sonic KE arrows come fully assembled and pre-fletched with AAE 2.7″ Stealth Hybrid vanes in a 3-fletch configuration with a 3-degree right helical. They’re built to John Dudley’s exact specifications and are ready to group as soon as you open the package, though you will need to cut them to your preferred length and install your choice of field points or broadheads.

The Nockturnal lighted UNISIZE Nocks are sized perfectly to fit directly into the Nock On Series 5mm Arrows. They also have universal bushing to fit S, H and GT size arrows. These nocks are an ideal nock fit on the string compared to the standard X nocks and fly amazing. Amazingly bright with a super long battery life.

Nockturnal Lighted FIT Nock

Features:

• Super Strong Clear Polycarbonate Construction
• Fits X, H, S, and GT Arrows
• 20+ Hour Battery Life
• 3-Pack

Improved LED's in your Green Strobing nocks

Non-Strobing FIT Nock: Designed to fit nearly every hunting arrow on the market the Nockturnal Fit non-strobing base nock will fit X-diameter arrows, and each three-pack of Fit nocks includes three sets of Nock Collar adapter sleeves to fit GT, S and H arrows. Each Fit nock features ultra-strong, impact-resistant, clear polycarbonate nock construction encapsulating the super-bright single LED that’s activated by a patented string-activated, piston-driven linear contact switch. Like all Nockturnal nocks, the Fit is guaranteed to reliably activate immediately when the string is released, and it can be switched off quickly and easily with the newly designed Nockturnal Nock Tool, a small screwdriver or most broadhead tips via an opening in the side of the nock. With well in excess of 20 hours of lithium battery life, each Nockturnal Fit weights approximately 25 grains and will remain brightly lit for arrow retrieval and can be easily spotted in daylight or darkness.

When every second of shooting light counts, Nockturnal Lighted Nocks deliver unmatched reliability and brightness you can count on in the field.

These super-bright green LED nocks feature our foolproof linear switch activation system that performs when it matters most. Whether you’re tracking your arrow’s flight path or following up after the shot, these nocks provide the visibility and dependability serious bowhunters demand.

Core Benefits

• Field-Proven Reliability: Rock-solid activation system that works flawlessly in any hunting condition.
• Universal Compatibility: Perfect fit for Nock On Series 5mm Arrows plus universal sizing for S, H, and GT arrows.
• Extended Performance: 20+ hours of ultra-bright illumination from long-life lithium batteries.
• Instant Operation: Bowstring-activated linear switch ensures immediate illumination on release.

Feature Breakdown

Advanced Linear Switch Technology

The heart of our Nockturnal system is the innovative linear switch mechanism. This plunger-style activation system engages instantly when your bowstring makes contact, guaranteeing illumination from release to impact.

No more fumbling with complicated switches or unreliable activation systems — when you need visibility, Nockturnals deliver.

Versatile Fit System

Each 3-pack includes our precision-engineered nock collar adapter sleeves, ensuring perfect compatibility across multiple arrow sizes.

The base nock fits X-diameter arrows, while included adapters accommodate GT, S, and H arrows. This universal fitting system maintains an ideal nock fit on your string, delivering consistent arrow flight comparable to standard X nocks.

Bulletproof Construction

Built with ultra-strong, clear polycarbonate construction, these nocks are engineered to withstand heavy impact while protecting the internal LED and battery system. The weather-sealed design ensures reliable performance in any hunting condition, from rainy morning sits to late-season snow.

Smart Power Management

The streamlined 15-grain design houses our advanced lithium battery system, providing over 20 hours of bright, consistent illumination. Each nock features an easy access port for quick deactivation using the Nockturnal Nock Tool, a small screwdriver, or most broadhead tips.

Technical Specifications

• Weight: 15 grains
• Battery Life: 20+ hours
• Construction: Impact-resistant clear polycarbonate
• Activation: Bowstring-activated linear switch
• Compatibility: X, H, S, and GT arrows with included adapters
• Quantity: 3-pack
• Color: Green LED
• Weatherproofing: Full water and weather resistance

Performance Features

• Immediate activation on release
• Visible in both daylight and darkness
• Tool-free installation
• Consistent arrow flight characteristics
• Easy deactivation system
• Reliable in all weather conditions

The Nockturnal difference is clear from the moment you nock your first arrow. These aren’t just lighted nocks — they’re a field-proven solution that gives you the confidence to take on any hunting situation, from dark ground blinds to last-light shot opportunities.

When reliability and performance matter, there’s no better choice than Nockturnal.

Nock On Training Bag Target

The Archery Bag Target That Makes You a Better Archer

The Nock On Training Bag Target isn’t just another arrow target bag. It’s a complete training system designed and field-tested by champion archer John Dudley.

Built in the USA through our collaboration with Morrell, this target incorporates multiple training zones that develop different aspects of your shooting, from basement practice to backcountry preparation. This purpose-built training tool provides specific aids for every shooting scenario you’ll face, taking your archery to the next level.

Nock On Training Target Bag Core Benefits

• All-in-One Training System: Multiple aiming options in one target bag for comprehensive skill development.
• Season-Round Practice: Perfect for indoor basement sessions and outdoor long-range preparation.
• Maximum Durability: Constructed to handle thousands of field point shots with easy arrow removal.
• 100% Target Utilization: Strategic aiming point placement extends target life by using the entire surface.

Feature Breakdown

Multi-Zone Training Surface

Front Side Training Quadrants

The front features four distinct training zones, each engineered for specific skill development:

Top Left: Tournament Preparation Zone — Three NFAA Vegas Target Faces give you the visual you need for competition practice. These targets build the mental focus required for shooting under pressure and prepare you for tournament scenarios.

Top Right: Shot Execution Zone — Nine 1¾-inch white aiming dots create the perfect environment for close-range practice. Ideal for basement or garage training, these dots help you focus on precise aim and shot execution fundamentals without distance distractions.

Bottom Left: Trust the Float Zone — This section features one 3½-inch center square surrounded by four 2-inch outer squares designed to help you build confidence in your natural pin movement. The square design makes it easier to visualize your pin float within the boundaries, reducing anxiety compared to traditional circular targets.

Bottom Right: Field Archery Simulation — NFAA Field Target Faces help you prepare for different field archery scenarios. These targets simulate the exact faces you’ll encounter in competition, building familiarity and confidence.

Center Alignment System — Horizontal and vertical center lines create the perfect reference for walk-back and bare shaft tuning. This system helps you dial in your setup, ensuring your arrows fly true when it matters most.

Back Side Long-Range System

The back side is designed for distance training with dedicated aiming points:

60+ Yard Center Dot: The large 10-inch center aiming point is the perfect target for extreme distance shooting, helping you build confidence when accuracy matters most.

50-Yard Practice System: Four 4-inch outer dots positioned at the corners create the perfect target size for consistent 50-yard practice, helping you master mid-range distances.

40-Yard Star System: Four 3½-inch stars positioned between the center and corners create perfect reference points for 40-yard practice, helping you develop confidence at this critical hunting distance.

Technical Specifications

• Dimensions: 27 inches tall × 25 inches wide × 15 inches deep
• Weight: 44 pounds
• Construction: Built in the USA in collaboration with Morrell Targets
• Arrow Compatibility: Field points only (not suitable for broadheads or arrows with outserts/collars)
• Transport: Equipped with a heavy-duty carrying handle
• Hanging System: Reinforced top rivets for suspended use
• Weather Resistance: Indoor/outdoor-rated construction
• Visibility: High-contrast green aiming points for better sight acquisition

Training Applications

Whether you’re building shot stamina after hunting season, working on your tension release, or practicing for tournament pressure, this target bag provides the perfect training environment.

The strategic layout lets you:

• Perform power-of-four drills using the stars or squares.
• Practice “around the world” shooting sequences.
• Trust your float with larger aiming points while fatigued.
• Simulate exact tournament conditions.
• Conduct precise walk-back tuning.
• Train at multiple distances with appropriately sized targets.

Performance Summary

The Nock On Training Bag Target is built to be your go-to training companion. Take it wherever your archery journey leads, from the basement to the backyard to the range.

The combination of durability, portability, and purpose-designed training zones makes this the most comprehensive archery bag target available. With easy-to-pull arrows and construction that can take thousands of shots, this target delivers professional-level training at an affordable price point.

ATTENTION: TRAINING BAG TARGETS DO NOT QUALIFY FOR FREE SHIPPING AND ARE ONLY AVAILABLE FOR SHIPPING IN THE LOWER 48 STATES OF THE USA. DUE TO WEIGHT AND SIZE, A $26.00 SHIPPING FEE WILL BE ADDED FOR EACH BAG TARGET SHIPPED IN THE USA. TARGETS WILL BE SHIPPED DIRECTLY FROM MORRELL. PLEASE EXPECT A TWO-DAY HANDLING AND PREP TIME PRIOR TO SHIPMENT.

For maximum target life, use field points only. Not suitable for broadheads or arrows with outserts larger than the shaft diameter.

 

Nock On Training Bag Target: Frequently Asked Questions

Can I use broadheads with this target?

No. The Nock On Training Bag Target is specifically designed for field points only. Using broadheads will damage the target and significantly reduce its lifespan.

For broadhead practice, use a target designed explicitly for that purpose.

Will this target work with arrows that have outserts or collars?

No. This target is not recommended for arrows with outserts or field points larger than the arrow shaft diameter. These can damage the target material and make arrow removal difficult, potentially leading to premature wear.

How much does the target weigh? Is it easy to transport?

The target weighs 44 pounds and measures 27 inches tall × 25 inches wide × 15 inches deep.

While substantial, it comes equipped with a heavy-duty carrying handle specifically designed for transport. This makes it portable enough to move between indoor and outdoor practice locations, though it’s still a solid target with significant weight.

What’s the shipping cost? Where can it be shipped?

Because of the target’s size and weight, a $26.00 shipping fee applies for each bag target shipped. Shipping is only available to the lower 48 states in the USA. Targets ship directly from Morrell with approximately two days of handling and prep time prior to shipment.

How long will this target last?

The Nock On Training Bag Target is built to handle thousands of shots with field points. Its strategic design places aiming points across both sides of the target to promote full use of the target surface, extending its life significantly.

For maximum durability, only use field points and avoid leaving the target in harsh weather for extended periods.

Are replacement covers available?

Yes. Replacement covers are available for purchase separately. This allows you to refresh your target’s appearance while continuing to use the core construction, extending the life of your investment.

What training drills can I do with this target?

The target is designed for multiple training applications, including:

• Power-of-four drills using the stars or squares
• “Around the world” shooting sequences
• Trust the float exercises with the square aiming points
• Tournament preparation with the Vegas faces
• Walk-back and bare shaft tuning using the center crosshair
• Distance training from basement practice to 60+ yard shooting
• Building shot stamina and tension release practice

Become your own Bow Tech with this perfect pad to teach you to home fletch.

Bitzenburger Custom Set Fletching Jig

Field-Tested and Nock On Approved

The Nock On Custom Bitzenburger Fletching Jig delivers professional-grade arrow-building precision that lasts a lifetime.

Each jig is removed from the box and then custom preset to John Dudley’s exact specifications, allowing you to start fletching immediately with confidence. These zinc die-cast alloy jigs are rock-solid, stable, and built for decades of flawless performance.

If you’re serious about arrow building, this is the jig that flat-out performs.

Fletching Jig Core Benefits

• Preconfigured to John Dudley’s exact specs: Start fletching perfect arrows right out of the box with the same 4-fletch 2.5-degree helical setup Dudley uses for both hunting and target archery.
• Precision-machined all-metal construction: Built from durable zinc die-cast alloy that’ll last decades.
• Fully inspected and field-tested: Every jig undergoes complete quality control inspection before shipping.
• Self-centering shaft receiver: Accepts and perfectly centers any arrow shaft on the market today.

Professional-Grade Construction

All-Metal Durability

Unlike plastic jigs that flex and wear out, the solid metal Bitzenburger construction ensures precise, consistent fletching placement every time. The all-metal design also makes cleaning adhesive residue easy and prevents the warping issues common in plastic alternatives.

I’ve owned my jig for 30 years and have seen archers use these jigs for their lifetime — this is truly the last fletching jig you’ll need to buy.

Precision Adjustment System

The Bitzenburger features large, easy-to-use dials at the top and bottom of the magnet holder, making angle adjustments quick and straightforward. This allows for perfect fine-tuning of your fletching offset or helical angle to match your shooting style and arrow build requirements. The jig holds the clamp at a 45-degree angle for clear visibility throughout the fletching process.

Powerful Magnetic Clamp

The permanent horseshoe magnet ensures precise, uniform placement of all feathers and vanes. The metal clamp design allows for easy cleaning of adhesive buildup, maintaining consistent vane placement arrow after arrow.

Each jig comes with either a premium Right or Left helical clamp that delivers perfect helical fletching patterns.

Customizable Fletching Patterns

Preset for Immediate Use

Each Nock On Bitzenburger comes configured to John Dudley’s specifications right out of the box.

You’ll start fletching the exact 4-fletch setup with 2.5-degree helical Dudley uses for both hunting and competition without making a single adjustment.

Adjustable Fletching Spacing

The jig features a precision nock receiver with three spacing configurations to match your preferred fletching pattern:

• 3-fletch 120-degree spacing (traditional triangular pattern)
• 4-fletch 90-degree spacing (John Dudley’s preferred setup)
• 4-fletch 75x105-degree spacing (advanced crosswind stability pattern)

Switching between patterns requires simple adjustments to the set screws, with audible click confirmations that ensure perfect spacing every time.

Technical Specifications

• Construction: Zinc die-cast alloy
• Clamp Type: Right or Left helical (John prefers Right helical)
• Weight: 1.9 lbs.
• Preset Configuration: 4-fletch, 90-degree spacing, 2.5-degree helical
• Shaft Compatibility: Universal — fits all arrow shaft diameters
• Includes: Jig body, helical clamp, adjustment tools, and instructions

Performance Summary

John Dudley designed this jig setup based on what actually works in the field. The Nock On Bitzenburger is the perfect combination of professional-grade construction, precision engineering, and field-tested performance.

When you’re building arrows your success depends on, this jig delivers consistent, professional results every time. This is the exact setup Dudley trusts for his arrows, whether he’s hunting in the backcountry or competing at the highest levels of archery.

Frequently Asked Questions: Nock On Bitzenburger Fletching Jig

What makes the Nock On Bitzenburger different from standard Bitzenburger jigs?

Each Nock On Bitzenburger comes preconfigured to John Dudley’s exact hunting and target archery specifications.

We inspect and adjust every jig before shipping to ensure it’s set up with the 4-fletch configuration with a 2.5-degree helical John uses for his arrows. This saves you time and guarantees professional results straight out of the box.

How do I know which helical option to choose?

John prefers and recommends the Right helical configuration for optimal arrow flight and broadhead performance. However, both Right and Left helical options are available if you have an established preference.

The helical direction creates spin in your arrow for improved stability, and once you choose a direction, it’s best to stay consistent with all your arrows.

How far should I position the fletching from the nock?

The Nock On arrow wraps include a convenient alignment line that provides the perfect reference point for consistent fletching placement.

For standard setups, position the back of the vane (the end closest to the nock) at this line or approximately 1–1.5 inches from the nock throat. Mark the corresponding tick mark on your clamp with a pencil for consistent placement on all your arrows.

Can I adjust the jig if I want a different fletching pattern?

Absolutely. While the jig comes preset to John’s specifications, it’s fully adjustable.

The two main dials adjust the clamp’s angle for different shaft diameters and offset preferences. The three set screws beneath the clamp control the rotation spacing (120°, 90°, or 75°×105°). Tighten the desired set screw just enough to hear the click confirmations, and back out the others until they’re flush with the edge.

How do I prevent glue buildup from affecting my fletching results?

The Bitzenburger clamp’s all-metal construction is an advantage over plastic jigs. When you notice glue buildup, use a dull knife to clean excess adhesive off the clamp. This ensures your vane sits flush in the clamp and maintains perfect alignment.

Always make sure your vane is seated all the way down in the clamp before applying it to the arrow.

Is the Bitzenburger worth the investment for occasional fletching?

The Bitzenburger is built to last decades. Many archers report using their jigs for 20+ years without issues. While cheaper options are available, the Bitzenburger’s precision, durability, and consistency make it the last fletching jig you’ll ever need to buy.

For serious archers who value perfect arrow flight, the investment pays for itself in performance and longevity.

How do I test if my fletching has the right amount of offset or helical?

A simple test is to place a vane in the clamp, position it against your arrow shaft, and trace along the edge with a pencil or marker. When you remove the clamp, you’ll see exactly what your offset or helical pattern looks like on the shaft. This helps you confirm you’re getting the proper contact between the vane and shaft along the entire length.

Max Bond is a high-viscosity liquid that is easy to work with and penetrates well when using with our tough Elastimax material. Whether you are fletching carbon or aluminum arrows, this is the toughest glue available. Use Max Bond on our Max Hunter, Pro Max, Plastifletch Max, WAV vanes. If the vane has MAX in the name you should be using our Max Bond Glue. Max Bond glue also works well with Elite Plastifletch and most other plastic vanes.

Make fletching easier with The Nock On Glue Stand. Made with powder-coated stainless steel that easily bends to perfectly hold your fletching glue so it's always on the ready!