Easton 5.0

The New Easton 5.0 Match is the all-new lightweight, small diameter arrow, designed to be a versatile shaft that offers multiple setup options due to the new High Modulus Accu-carbon. The lighter overall mass weight of the Easton 5.0 allows for a versatile range of arrow setup options that give you the ability to boost higher-FOC configurations without boosting overall weight. The Nock On Easton 5.0 comes standard with BRASS 50/75 gr HIT insert & New Match Grade Stainless Steel collars giving you more durability and F.O.C options than standard 5.0 that are available. Built on a micro-diameter 5mmAcu-Carbon platform, the Easton 5.0 reduces friction for enhanced penetration and decreases wind resistance for greater accuracy and higher velocity downrange. Crafted in the USA using Easton’s seamless Acu-Carbon processand high-modulus carbon fiber, the 5.0 ensures consistent weight and spine in every shaft and across every dozen.  The 5.0 features Easton’s new 5MM Microlite™ Nock System, which is a more compact nock body and a redesigned throat for a perfect string fit. 

Available in spine sizes (250, 300, 340, 400) the Easton 5.0 accommodates virtually all bowhunting setups.

Why the New 5.0 VS Axis? - the Short answer is Speed & More component Options! The benefits to the new 5.0 Carbon is that this new higher modulus carbon is lighter weight and allows an archer to add in extra front insert, point weight or lighted nocks to the arrow while keeping the overall weight of the arrow similar to the original axis that wouldn’t have those. I have personally loved the Original AXIS match grade shafts using the brass inserts for 20 years now. They are dependable and deadly accurate. For the archer who is lower in pulling weight or shorter in draw length and is looking to save any weight possible to boost speed then this NEW 5.0 is a great arrow for that. The 5.0 is about 2 grains lighter per inch of arrow and saving that weight lets you choose whether to get the speed or add weight to the right places to boost your FOC numbers. These options and higher modulus carbon do come at a cost though with the price tag being higher for the 5.0 than with an Axis. If you are not chasing speed numbers or on a limited budget the Standard Match Grade Axis are still and always will be an awesome choice. I have used both the Axis & 5.0 throughout the season and will continue to depending on the application. - Dudley 

Size Chart

The New Easton 5.0 Match is the all-new lightweight, small diameter arrow, designed to be a versatile shaft that offers multiple setup options due to the new High Modulus Accu-carbon. The lighter overall mass weight of the Easton 5.0 allows for a versatile range of arrow setup options that give you the ability to boost higher-FOC configurations without boosting overall weight. The Nock On Easton 5.0 comes standard with BRASS 50/75 gr HIT insert & New Match Grade Stainless Steel collars giving you more durability and F.O.C options than standard 5.0 that are available. Built on a micro-diameter 5mmAcu-Carbon platform, the Easton 5.0 reduces friction for enhanced penetration and decreases wind resistance for greater accuracy and higher velocity downrange. Crafted in the USA using Easton’s seamless Acu-Carbon processand high-modulus carbon fiber, the 5.0 ensures consistent weight and spine in every shaft and across every dozen.  The 5.0 features Easton’s new 5MM Microlite™ Nock System, which is a more compact nock body and a redesigned throat for a perfect string fit. 

Available in spine sizes (250, 300, 340, 400) the Easton 5.0 accommodates virtually all bowhunting setups.

Why the New 5.0 VS Axis? - the Short answer is Speed & More component Options! The benefits to the new 5.0 Carbon is that this new higher modulus carbon is lighter weight and allows an archer to add in extra front insert, point weight or lighted nocks to the arrow while keeping the overall weight of the arrow similar to the original axis that wouldn’t have those. I have personally loved the Original AXIS match grade shafts using the brass inserts for 20 years now. They are dependable and deadly accurate. For the archer who is lower in pulling weight or shorter in draw length and is looking to save any weight possible to boost speed then this NEW 5.0 is a great arrow for that. The 5.0 is about 2 grains lighter per inch of arrow and saving that weight lets you choose whether to get the speed or add weight to the right places to boost your FOC numbers. These options and higher modulus carbon do come at a cost though with the price tag being higher for the 5.0 than with an Axis. If you are not chasing speed numbers or on a limited budget the Standard Match Grade Axis are still and always will be an awesome choice. I have used both the Axis & 5.0 throughout the season and will continue to depending on the application. - Dudley 

Size Chart

Here's your chance to build your on own Sonic KE to SLICE THE WIND & HIT HARD for an awesome price! The Nock On Sonic KE is a 6mm super straight, extremely consistent high-performance arrow that comes standard with 75/50 grain break off brass inserts for the front. The Sonic KE is a custom engineered arrow that’s perfect for both Hunting and Target archery speeds while boosting FOC up to 25% when using the provided custom brass inserts. The Sonic KE is built in the USA using Easton’s seamless ACU-Carbon process for 100% weight and spine consistency from shaft to shaft and from dozen to dozen. Lighter overall mass weight provides for a wider-range of arrow build options using the provided 75/50 break off inserts. This shaft is perfect for anything ranging from the Total Archery Challenges to Bowhunting large game animals. 

The Nock On Sonic KE is a SELECT GRADE shaft (+-.0015) that is pre-sorted from the factory giving you the highest quality shafts for straightness and weight.

Save Big, Lose Nothing

The Sonic KE gives you all the accuracy at the best price. These arrows are priced right, with you getting big benefits without losing on straightness or weight tolerances.

Sonic KE Arrows Core Benefits

• Enhanced Kinetic Energy: Standard 75/50-grain brass inserts boost FOC up to 25% for superior downrange ballistics and momentum through your target.
• Premium-Grade Construction: SELECT GRADE shafts (+-.0015) presorted from the factory for exceptional straightness and weight consistency.
• Versatile Performance: Perfect balance of speed and impact for everything from Total Archery Challenges to taking down large game animals.

Maximum Front-End Weight Options

The Sonic KE comes standard with custom 75/50 break-off inserts, giving you control over your setup based on your shooting needs. These inserts allow you to boost your FOC dramatically while maintaining optimal overall arrow weight. The shaft’s lighter mass weight compared to Axis or FMJ arrows means you can run the full 75 grains up front and still maintain the total arrow weight you’re used to.

When you choose the full 75 grains of brass, you’ll get 25% more FOC compared to standard arrows with 50 grains of brass. This means better wind-cutting ability and increased momentum that carries through your target — exactly what you need when it matters most.

Spine Selection Tip: For maximum performance with the 75-grain inserts, select one spine size stiffer than your normal arrows with aluminum inserts.

High-Performance American-Made Shafts

The Sonic KE arrows are built using Easton’s proven AccuCarbon process right here in the USA. This means guaranteed straightness and weight tolerances from shaft to shaft and dozen to dozen. These 6mm shafts provide the perfect balance — stiff enough for consistent accuracy but light enough to maintain speed with the heavier front end.

Each arrow is a SELECT GRADE shaft (+-.0015) that’s presorted at the factory, giving you only the highest quality shafts for straightness and weight consistency. This tight tolerance control eliminates variables from your shooting equation, allowing you to focus on your shot execution rather than worrying about arrow inconsistency.

Versatile Applications

Whether you’re heading to a Total Archery Challenge, shooting 3D, or hunting big game, these arrows deliver the performance you need.

The lighter shaft weight combined with the heavy front end gives you options that weren’t possible before, maintaining speed for longer distances while still getting the penetration and durability benefits of higher FOC.

For hunting setups, the increased FOC dramatically improves flight stability and penetration on game animals. For competition, you’ll get the accuracy benefits of premium-grade arrows at a price point that won’t break the bank.

• Please note that we would recommend getting one spine size stiffer than normal and use the full 75 grains for maximum affect! 

Size Chart

Here's your chance to build your on own Sonic KE to SLICE THE WIND & HIT HARD for an awesome price! The Nock On Sonic KE is a 6mm super straight, extremely consistent high-performance arrow that comes standard with 75/50 grain break off brass inserts for the front. The Sonic KE is a custom engineered arrow that’s perfect for both Hunting and Target archery speeds while boosting FOC up to 25% when using the provided custom brass inserts. The Sonic KE is built in the USA using Easton’s seamless ACU-Carbon process for 100% weight and spine consistency from shaft to shaft and from dozen to dozen. Lighter overall mass weight provides for a wider-range of arrow build options using the provided 75/50 break off inserts. This shaft is perfect for anything ranging from the Total Archery Challenges to Bowhunting large game animals. 

The Nock On Sonic KE is a SELECT GRADE shaft (+-.0015) that is pre-sorted from the factory giving you the highest quality shafts for straightness and weight.

Save Big, Lose Nothing

The Sonic KE gives you all the accuracy at the best price. These arrows are priced right, with you getting big benefits without losing on straightness or weight tolerances.

Sonic KE Arrows Core Benefits

• Enhanced Kinetic Energy: Standard 75/50-grain brass inserts boost FOC up to 25% for superior downrange ballistics and momentum through your target.
• Premium-Grade Construction: SELECT GRADE shafts (+-.0015) presorted from the factory for exceptional straightness and weight consistency.
• Versatile Performance: Perfect balance of speed and impact for everything from Total Archery Challenges to taking down large game animals.

Maximum Front-End Weight Options

The Sonic KE comes standard with custom 75/50 break-off inserts, giving you control over your setup based on your shooting needs. These inserts allow you to boost your FOC dramatically while maintaining optimal overall arrow weight. The shaft’s lighter mass weight compared to Axis or FMJ arrows means you can run the full 75 grains up front and still maintain the total arrow weight you’re used to.

When you choose the full 75 grains of brass, you’ll get 25% more FOC compared to standard arrows with 50 grains of brass. This means better wind-cutting ability and increased momentum that carries through your target — exactly what you need when it matters most.

Spine Selection Tip: For maximum performance with the 75-grain inserts, select one spine size stiffer than your normal arrows with aluminum inserts.

High-Performance American-Made Shafts

The Sonic KE arrows are built using Easton’s proven AccuCarbon process right here in the USA. This means guaranteed straightness and weight tolerances from shaft to shaft and dozen to dozen. These 6mm shafts provide the perfect balance — stiff enough for consistent accuracy but light enough to maintain speed with the heavier front end.

Each arrow is a SELECT GRADE shaft (+-.0015) that’s presorted at the factory, giving you only the highest quality shafts for straightness and weight consistency. This tight tolerance control eliminates variables from your shooting equation, allowing you to focus on your shot execution rather than worrying about arrow inconsistency.

Versatile Applications

Whether you’re heading to a Total Archery Challenge, shooting 3D, or hunting big game, these arrows deliver the performance you need.

The lighter shaft weight combined with the heavy front end gives you options that weren’t possible before, maintaining speed for longer distances while still getting the penetration and durability benefits of higher FOC.

For hunting setups, the increased FOC dramatically improves flight stability and penetration on game animals. For competition, you’ll get the accuracy benefits of premium-grade arrows at a price point that won’t break the bank.

Technical Specifications

• Construction: 6mm diameter carbon shaft with ACU-Carbon process
• Insert System: 75/50 grain break-off brass insert (75 grain standard)
• Fletching: AAE 2.7″ Stealth Hybrid, 3-fletch, 3° right helical
• Straightness: SELECT GRADE (+-.0015)
• Spine Options: Available in 400, 340, 300, and 250 spines (select one spine stiffer than usual when using 75-grain inserts)
• Weight: Lighter overall mass weight than comparable Axis or FMJ arrows
• Quantity: 6 arrows per pack

• Please note that we would recommend getting one spine size stiffer than normal and use the full 75 grains for maximum affect!

Size Chart