RESTS

The New Nock On Integrate MX2 ULTRAREST® the most robust and easiest micro adjustment rest on the market. The new MX2 is an all aluminum rest and gives you precision click micro-adjustments for both vertical and horizontal adjustments. It also features a new 20degree V-groove launcher arm that was designed in collaboration with John Dudley thats more suited for centering smaller shaft diameters and preventing centerline variation in the wind. The Nock On MX2 also comes with 2 colors of dampers for the launcher arms. In addition It's packed with all the innovative technologies you expect from QAD like, cable driven drop-away prong, slow let-down bracing system and Total containment of the arrow.

The "Integrate" Mounting System® is a seamless connection to the back of the riser and guarantees a rock-solid mount and is up to 60% lighter than Berger mount rests. 

Compatible with Integrate Mounting System® found on Mathews, Hoyt, PSE, Bowtech, Prime, Elite, Darton, Bear, Xpedition, and APA bows. Made in the USA. Limited lifetime warranty.

Improvements:

• Machined Aluminum Launcher and Rest Body
• Replaceable launcher dampers allow for personal customization.
• 2 COLOR option on Nock On Model Only (green/gray)
• Launcher dampers reduce noise and vibration.
• The launcher dampers have eliminated the need for prong felt on the side arms. 
• New Launcher V groove with 20degree channel
• Improved compact launcher design that is even tougher than before yet intricately machined for an impressive look.
• A redesigned rugged stealthy capture bar built 4x stronger than the MX version.

Smart Rest Technology

Total Containment Technology (TCT™)

• Using the thumb lever, quickly load your arrow and cock the launcher into the 80° capture position. Your arrow will never fall off the rest and remains fully contained until you are ready to shoot.
• The improved capture bar design is angled forward to allow for a compact capture window, limiting arrow bounce and movement when positioning your bow.

Velocity Drop-Away Technology (VDT™)

• When the bow is drawn, the launcher rotates to 90° and VDT is activated. The launcher will drop only when the bow is fired. Slow let-down will return the rest to the 80° capture position, the arrow remains fully contained, and the bow is ready to draw again.

Lock Down Technology (LDT™)

• When the launcher falls, LDT locks the launcher at 0° eliminating bounce back and ensuring total fletching clearance for the most accurate shots possible.

Safety Breakaway Technology (SBT™)

• If the launcher is improperly forced down, it will safely breakaway preventing damage or injury.

Anti-Vibration Technology (AVT™)

• Cam brake and dampers kill noise and vibration.
• Redesigned launcher has been interlinked with composite dampers, eliminating the need for felt on the forks and reduces noise and vibration.

Micro-Click Technology (MCT™)

• Horizontal and vertical adjustment at .0019” per click. Anti-backlash technology ensures that every click is an adjustment – no more guessing.

EZ Clamp Technology (EZT™)

• Quick and easy timing cord adjustments. No bow press or serving required.

Integrate Mounting System® Features:

• Auto Level Technology (ALT™) automatically levels the rest with the riser for quicker tuning.
• No mounting block, bolts, or set screws results in a sleek, lightweight design.
• Dual dovetail clamps result in a 2x stronger hold than bolt mounted rests. The rest physically cannot rotate once locked down.
• With the rest mounted to the rear face of the riser, low-profile quivers can be mounted closer to the riser, achieving a more balanced bow setup.

The new Nock On UltraRest HDX is a total containment, high-performance, cable-driven drop-away arrow rest made in the USA. This total containment rest keeps the arrow in position regardless of how you are maneuvering your bow while stalking, in a ground blind or treestand or on the range. When your bow is drawn, the launcher auto rotates to 90 degrees and the Velocity Drop-Away Technology is activated. Velocity Drop-Away Technology allows the launcher to drop only when the bow is fired through the use of high-tension springs with full arrow clearance at over 400 FPS. It also utilizes Lock Down Technology that prevents any bounce back of the rest prongs, which prevents any sort of fletching or arrow contact on the prongs during the firing process. It is built with a cam brake and damper design that kills noise and vibration resulting in an ultra-quiet shot. 

The Nock On UltraRest HDX has vertical and horizontal micro-adjustment capability and an ergonomic, easy-to-use thumb cocking and un-cocking lever. Our Nock On model comes with silencing felt as well as our exclusive Nock On shrink tubing that provides an extra level of durability and silencing barrier to the prongs and the capture bar. To learn how to install the silencing shrink tubing, please click the video link below. Each one of the Nock On UltraRest HDX has been built with the spacer block installed, and horizontal adjustments made, for the majority of today's high-end model bows. (Finite adjustments will need to be made based on your specific bow model).

For Silencing Shrink Tubing Installation Video Click HERE

Protected by US patent #6,789,536

ELEVATE PRO Replacement Blade (Qty 1) You must select one of 3 sizes for WIDTH and THICKNESS.

John Dudley's recommendations on Blades Width are FREAK for Micro diameter Arrow, STANDARD for standard diameter arrows up to 22 dia. & the WIDE blade for arrows larger than a 23 wall diameter.

Blade THICKNESS depends on angle you set your blade and weight of your arrow. Heavier arrows will need a heavier blade. .010 is the most common but lighter arrows will tune better with a .080 and heavier arrows may prefer up to a .012.