Riddance Stabilizer — Short Rod

The Nock On Riddance Stabilizer does one job: eliminate vibration and noise from your bow. After several years of testing dozens of material combinations, John Dudley landed on a blend of two proprietary materials inside the bar that target specific frequencies generated during the shot cycle.

The Riddance short rod archery stabilizer is available in eight-inch and 10-inch lengths. Measured collar to collar, the actual length is three inches longer out of the box with the Doinker and weight stack installed. Each rod comes with three one-ounce Cerakoted stainless steel weights, a licensed Doinker A-Bomb dampener, and an AAE containment collar system.

Archers who’ve tried the Riddance consistently report the same reaction: they noticed an immediate difference in vibration and noise after one shot.

Core Benefits of the Riddance Short Rod Stabilizer

• Vibration and Noise Elimination: Two proprietary bar materials target specific frequencies generated during the shot, dissipating vibration before it reaches your hand
• Dead-in-Hand Feel: The combination of bar material, Doinker A-Bomb dampener, and AAE collaring creates a feel that archers describe as the quietest and most dead in hand they’ve experienced
• Balanced Stiffness: Stiff enough to handle a fully weighted system without flex, but not so stiff that it starts affecting your groups
• Two Length Options: Eight-inch rod (11 inches total out of the box) and 10-inch rod (13 inches total out of the box) for hunting and back-bar configurations

Riddance Short Rod Stabilizer Features

Proprietary Dual-Material Bar

The bar contains two proprietary materials blended together to address two specific frequency ranges produced during a bow’s shot cycle. The handle, limbs, cam system, and strings each generate different vibrations and frequencies at the moment of the shot. These materials work together to dissipate that energy before it reaches your grip hand.

John Dudley tested dozens of material combinations over several years to find the right balance of stiffness and dampening. The bar is stiff enough to support weight without flexing, but not so rigid that it transmits vibration back to you or causes movement in your sight picture.

Doinker A-Bomb Dampener

Each Riddance short rod comes with a licensed Doinker A-Bomb dampener. John Dudley shot this dampener system decades ago on his most reliable target setups and licensed it for the Riddance line.

The A-Bomb absorbs any remaining vibration in the system. John Dudley has called this dampener critical for dissipating any energy the bar materials don’t capture.

AAE Containment and Collar System

The end collars use AAE’s collaring system, which John Dudley calls a bulletproof lockdown for the weight stack and dampener.

The collar allows you to stack weight and swap configurations with a rock-solid lockdown.

Cerakoted Stainless Steel Weights

Three one-ounce Cerakoted stainless steel weights come standard on each short rod. You can remove weights to lighten the system or buy additional weight stacks to add more.

Which Short Rod Length Is Right for You

The eight-inch rod (11 inches total with dampener and weights) is the shorter option. John Dudley recommends it for hunters who shoot their sight close to the bow. When you set your bow on the ground, the shorter rod keeps your sight out of the mud and debris.

The 10-inch rod (13 inches total) works better if you shoot an extended sight like a Fast 80XL. The extra length keeps your sight clear of the ground when the bow is resting.

Riddance Short Rod Technical Specifications

• Available Lengths: 8″ and 10″ (collar to collar)
• Total Length Out of Box: 11″ (8″ rod) and 13″ (10″ rod) with dampener and weight stack
• Bar Material: Two proprietary materials blended for frequency-specific dampening
• Dampener: Licensed Doinker A-Bomb
• Collar System: AAE containment collaring
• Included Weights: Three one-ounce Cerakoted stainless steel weights
• Additional Accessories: Weights and sidebar bracket sold separately

Riddance Short Rod Stabilizer Performance

This bow stabilizer gives you vibration and noise reduction that archers consistently notice on the first shot. Pair the eight-inch as a back bar with a Riddance long rod up front, or use the 10-inch as a front rod for extended-sight setups.

Either way, the combination of proprietary bar materials, the Doinker A-Bomb, and the AAE collar system is built to say good riddance to vibration and bow noise.

Frequently Asked Questions About the Riddance Short Rod Stabilizer

How does the Riddance compare to other stabilizers for vibration?

The two proprietary materials in the bar are blended to target the specific frequencies a compound bow generates during the shot. The dual-material approach, combined with the Doinker A-Bomb and AAE collar, creates a system where vibration and sound dissipate before reaching your hand.

Archers who’ve tried the Riddance have reported less vibration and a quieter shot compared to their previous setups. Customer reviews consistently mention a noticeable difference after the first shot.

Can I use the short rod as both a front bar and a back bar?

The short rod works in either position. Many archers run the eight-inch as a rear stabilizer paired with a Riddance long rod up front. Others use the 10-inch as a standalone front stabilizer for hunting setups where a longer rod would be impractical.

If you’re using a sidebar bracket, the short rod pairs with the Nock On gripper mount, which offers a range of angle adjustments and a quick-release system for removing the rear stabilizer.

How much weight can I add to the short rod?

Each rod comes with three one-ounce weights. You can remove weights to lighten the setup or buy additional three-ounce weight stacks to add more. The AAE collar system and bar stiffness handle a fully weighted configuration without flex.

John Dudley prefers keeping weight closer to the center of the bow rather than loading up the end of the rod. He’s found that too much weight out front forces archers to compress their shoulder or hitch their hips to hold steady, which hurts technique even if the sight picture looks stable.

What’s the difference between the eight-inch and 10-inch short rod?

Both use the same bar materials, dampener, collar system, and weights. The eight-inch (11 inches total) is a tighter package for close-sight hunting setups and back-bar use. The 10-inch (13 inches total) gives extra clearance for extended sights and works as a standalone front rod.

Do I need the sidebar bracket, or is it included?

The sidebar bracket is sold separately. If you’re running the short rod as a rear stabilizer, you’ll need the Nock On gripper mount, which provides adjustable angles and a quick-detach system for removing the rear bar.

Will a stabilizer actually improve my groups?

A stabilizer affects your groups in two ways: the added weight and length reduce pin float for a steadier hold, and proper stabilization helps with your tune. Shoot through paper with your full stabilizer setup, then shoot again with a minimal setup, and compare the results.

John Dudley warns against chasing a perfectly still pin by overloading weight. If you need a lot of strength to hold your bow arm up, the technique breakdown costs more than the stability gains. Start with the stock weight configuration and add or remove from there based on how your groups respond.