Nock On Back Strap Tension-Activated Wrist Release
Tension-Activated Performance for Wrist Strap Shooters
The Nock On Back Strap solves one of archery’s biggest problems: starting with a wrist strap release that leads to punching the trigger and freezing on target.
This tension-activated wrist release brings proven back tension principles to a comfortable wrist strap design. After years of coaching archers through target panic issues, we’ve built a release that lets you safely draw, anchor properly, and get a true surprise shot every time.
When that buck steps into range, this release delivers rock-solid performance.
What This Release Does
-
Stops Target Panic: Eliminates freezing and punching by forcing a surprise break.
-
Works Two Ways: Use it as a tension-activated or standard index trigger with one adjustment.
-
Fits Perfect Every Time: The BOA system gives you an exact fit, whether you’re in a T-shirt or layers.
-
Built for Hunting: Compact, quiet, and tested in real hunting situations.
The Back Strap Advantage
Center Pivot Safety System
The Back Strap uses a practical safety system that actually works in the field. Draw your bow with your finger behind the trigger, anchor solid, then squeeze the trigger to deactivate the safety. Now pull back against the wall to your preset weight until your shot breaks with a total surprise — no punching, no freezing, just a clean break.
This release brings proper shooting technique to a wrist strap design, giving you the benefits of back tension while keeping the familiar feel many hunters prefer.
BOA Wrist Strap
We’ve licensed a BOA strap system that flat-out works in the field. It’s the same tech used in quality snowboard boots and running shoes, so you know it’s built to last.
Just push the dial and tighten it to your comfort level, whether you’re in a T-shirt or bundled up. Done shooting? Just lift the dial, hear the click, and slide your hand right out.
No more fumbling with Velcro or D-loops that never hit the right spot. This is comfortable, quiet, and built for real hunting conditions.
Simple Tension Adjustment
The Back Strap uses the same internal mechanism as our Silverback Plus series, giving you tension adjustment from nine up to 40 pounds of pull tension with just one spring. No need to swap springs or components. Just turn the Allen wrench and you’re set.
A little adjustment goes a long way — usually just a quarter turn makes a noticeable difference. For best results of firing tension, set it about four to six pounds over your bow’s holding weight (e.g., if you’re at 80% let-off on a 70-pound bow, you’re holding 14 pounds, so set the release around 18-20 pounds, which is right where it comes out of the package).
Compact Open-Hook Design
The Back Strap is built super compact — no more bulky releases hanging off your wrist. The open-hook design makes loading onto your D-loop quick and clean, even with cold hands or low light. Just hook and go. The jaw opens smoothly and reliably every time.
We’ve kept everything tight and minimal without sacrificing durability, because we know this release needs to perform season after season in tough conditions.
The jaw is a reverse design that opens away from your face, giving you ideal clearance with a beard or face mask.
Two Releases in One
What really separates the Back Strap from anything else out there is that you can use it two ways: Set it up for proper tension activation to build good habits and eliminate target panic, or quickly adjust it to work just like a standard index release if that’s what you need for a specific hunting situation.
This isn’t just a release. It’s also the ultimate training tool that’ll improve your shot process. Perfect for new shooters avoiding bad habits or experienced archers looking to clean up their form.
Tech Specs
-
Tension Range: Nine to 40 pounds firing weight (single spring — no need to swap parts)
-
Wrist Fit: BOA system adjusts to fit virtually any archer
-
Conversion: Easily switches between right- and left-handed use
-
Size: Super compact, minimal bulk on your wrist
-
Compatibility: Works with any standard D-loop
-
Included: Allen wrench for all adjustments
-
Operation: Safety-based system with continuous pull activation
-
Wrist Sizes: Fits wrists as small as 5.75″ up to large adult sizes
Using the Back Strap
The Back Strap works in a straightforward, practical way:
-
Draw and Anchor: Finger behind the trigger, draw back, and anchor with your index knuckle at the base of your earlobe.
-
Squeeze: Squeeze the trigger to deactivate the safety but not fire the arrow.
-
Pull: While aiming on target, keep pulling against the back wall, focusing on your elbow moving straight back.
-
Let It Break: The shot breaks clean with a surprise release when you pull to the preset weight.
Need to use it like a standard index trigger release? Just back out the tension screw until it’s about flush with the casing, tighten the set screw, and you’re good to go. It works just like the wrist strap you’re used to.
Why I Developed the Back Strap
Through years of coaching, I’ve seen one problem more often than any other: new archers starting with a wrist strap release, developing the habit of punching the trigger, and ending up with target panic or buck fever.
The Back Strap fixes this issue by bringing proper back tension principles to a familiar wrist strap design.
The concept is simple but powerful: Trust your pin float, pull through the shot, and let it break with a surprise. This is the same technique used by top competitive archers worldwide and now available in a format that works for both training and hunting.
If you’ve struggled with freezing under the target or punching your release, or if you just want to build better shooting habits from the start, the Back Strap will help you get there. No gimmicks, no compromises — just solid technique built into a practical design that performs when it matters.
Frequently Asked Questions: Nock On Back Strap
How does the BOA wrist strap system work? Is it durable?
The BOA system is incredibly durable — it’s the same technology used in high-end snowboard boots and cycling shoes.
To tighten, just push down on the BOA dial and rotate for perfect micro-adjustment. For removal, simply lift the BOA dial until it clicks and slide your hand out. This allows for much better adjustability than traditional Velcro straps, especially when wearing different clothing layers or gloves.
Will I need to adjust my anchor position or peep height when switching to the Back Strap?
Most archers can use their existing peep setup without changes. For proper form, place your index knuckle at the base of your earlobe, with your thumb slightly relaxed under your jawline. This position typically maintains your existing peep height.
If needed, you can make minor D-loop adjustments more easily than with handheld releases, since wrist releases don’t create the same string torque concerns.
What’s the tension adjustment range, and how do I set it properly?
The Back Strap adjusts from nine to 40 pounds with a single spring — no need to swap components like with older releases. One full turn changes the activation weight by approximately 10 pounds, so small adjustments make a big difference.
For most setups, set it to fire at four to six pounds over your bow’s holding weight. For example, if you’re shooting a 70-pound bow with 80% let-off (14 pounds holding weight), start with the tension around 19–20 pounds, which is how it comes out of the package.
Can I still let down safely after I’ve deactivated the safety?
Absolutely. After drawing and squeezing the trigger to deactivate the safety, you can simply release pressure on the trigger to re-engage the safety, allowing you to let down safely. This makes the Back Strap practical for hunting situations where you might need to hold and then let down.
Will my point of impact change compared to other releases?
Yes, you’ll likely notice a different point of impact compared to other releases. This follows the common archery principle that when you change anything, you change everything.
Most right-handed shooters find they hit slightly left with the Back Strap compared to handheld releases. Adjust your sight accordingly, and consider marking your sight or counting clicks so you can quickly switch between releases if needed.
How does the Back Strap compare to the Silverback Plus handheld release?
Both releases use the same internal tension mechanism, but determining which one is better comes down to personal preference.
The Back Strap is ideal if you prefer having your release always attached to your wrist or you’re transitioning from a traditional wrist strap. The Silverback Plus might be better if you prefer a handheld release’s feel and anchor position. Both provide the same tension-activated surprise shot, just with different anchor positions and handling characteristics.
Is the Back Strap suitable for smaller archers, youth, or women?
Yes. The BOA system accommodates wrists as small as 5.75″ in diameter, making it comfortable for youth archers, women, and anyone with smaller wrists. The adjustable cord length also ensures proper trigger positioning regardless of hand size.
